'28 Worm Drive Gear Question.

AA Ford Discussion Group relating to the repair and restoration of your AA Ford.
Post Reply
User avatar
Soundgourmet
Posts: 8
Joined: April 6th, 2006, 4:53 pm
Model Year: 1930

'28 Worm Drive Gear Question.

Post by Soundgourmet »

Hello all,
I have a 1928 AA, single wheel flat bed with the Worm gear and Dual High drive.

I just pulled my rear-end apart to give it a once over before I get to start putting things back together. (Finally) Upon inspecting the worm drive gears I found some pitting/wear marks on the teeth. (See attached photo). Sorry for my ignorance, but is this normal wear and tear, or is this something I should be concerned with replacing?

Thanks in advance for your help!
Attachments
IMG_5897-1.jpg
IMG_5897-1.jpg (25.26 KiB) Viewed 3327 times
Post Reply