Do the floor boards sold by MAC's fit a 1930 AA? I remember reading somewhere the AA boards are different. What exactly do I need to do to the boards from Mac's to make it fit my truck?
I should note my truck started out as a 30 panel delivery and someone back then modified it into a gravity dump.
Thanks
Floor Board
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: Floor Board
If the MAC's floor boards are for the A, then they would need to be modified for the AA with a 4-speed. The April 2007 newsletter from the Ford Model AA Truck Club has an article regarding AA floor boards. The cut out for the transmission in the A #2 floor board would need to be modified as shown on page 26.
Any 4-speed AA131 or AA157 would have the same floor board #2 (regardless of body type).
Any 4-speed AA131 or AA157 would have the same floor board #2 (regardless of body type).
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/