I have a Model AA front bumper. 1930 or 1931. It is just like the car bumper but it is much larger in size.
The back has a curved metal band going from the center of the two ends, and is connected in the middle of the bumper.
That band does not have any holes for a bolt to connect it to the bumper arms that are mounted on the frame.
I want to put this on my AA snowmobile. Can anyone tell me the correct way to mount it? Is there some kind of clamp to hook the bumper to the arms?
Thank you very much, any help will be greatly appreciated.
Pat
AA Front Bumper
-
- Posts: 133
- Joined: March 11th, 2007, 6:57 pm
- Body Type: 82A
- Model Year: 1928
- Location: Skowhegan, Maine
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: AA Front Bumper
Hello Pat,
Attached is a drawing of the double bar AA bumper extracted from the Judging Standards. Note that the back bumper bar is attached to the bumper brackes with two u-bolts. The bumper brackets have notches for the u-bolts.
Attached is a drawing of the double bar AA bumper extracted from the Judging Standards. Note that the back bumper bar is attached to the bumper brackes with two u-bolts. The bumper brackets have notches for the u-bolts.
- Attachments
-
- E-20 crop.jpg (39.72 KiB) Viewed 2164 times
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/