Mike,
This is a pretty cool site and I have enjoyed looking thru everyones questions and answers. My grandfather just dropped of my 1931 AA this summer after he and I have done some work on it for the last 15 years. I was wondering if you are going to make a "Gallery" section to post pictures of the projects that everyone is working on. Right now I am removing the front end to replace the spindle bushings to get rid of the shimmy at 35 miles an hour.
Thanks,
Dave
Pictures?
King Pin Bushings
dyoung on a previous post you said you found some brass king pin bushings for 75 cents. Where did you get them from?
Mark / Wi
Mark / Wi
- dyoungs
- Posts: 158
- Joined: November 12th, 2003, 5:28 pm
- Body Type: AA
- Model Year: 1931
- Location: Vestal, New York
Bearings
Mark,
You should be able to get the bearings at a bearing dealer. You can go online to order them but they will probably have a$10 min order. The part number that you need is AA-1156-3. If you need me to get them for you let me know I have a place here that can get them for me and I can ship them to you. Try the oilite site they have a bearing calculator if you need any other bearings as well..
Good Luck,
Dave Youngs
You should be able to get the bearings at a bearing dealer. You can go online to order them but they will probably have a$10 min order. The part number that you need is AA-1156-3. If you need me to get them for you let me know I have a place here that can get them for me and I can ship them to you. Try the oilite site they have a bearing calculator if you need any other bearings as well..
Good Luck,
Dave Youngs