Direct enclosed transport since 2011 on the AA Forum ....
-
- Posts: 964
- Joined: April 5th, 2011, 3:28 am
- Body Type: Model A
- Model Year: 1930
- Location: OH to TX to Seattle hauling now
- Contact:
This trip is done
This trip is done
August 20th
Leaving Detroit, MI for Seattle, WA
Your pick up & drop off must be along my route ...
Limited enclosed space available - call to see how much room
Click Here to See My Route @ http://mapq.st/1hojwDL
Jim
(260) 804-6695
August 20th
Leaving Detroit, MI for Seattle, WA
Your pick up & drop off must be along my route ...
Limited enclosed space available - call to see how much room
Click Here to See My Route @ http://mapq.st/1hojwDL
Jim
(260) 804-6695
Last edited by Trulyvintage on August 25th, 2015, 9:42 am, edited 1 time in total.
-
- Posts: 964
- Joined: April 5th, 2011, 3:28 am
- Body Type: Model A
- Model Year: 1930
- Location: OH to TX to Seattle hauling now
- Contact:
This trip is done
This trip is done
August 25th
Available from POULSBO, WA 98370
Direct Enclosed Transport
Vehicle - Cargo - UTV - ATV - Tractor - Implement
My custom built heavy duty car hauler features:
Triple 5200 pound axles
8 inch full perimeter steel tube frame
14,000 pound GVWR
34 feet fully enclosed
8000 pound capacity
22 inch rear door loading height
88 inch wide rear door width
94 inch rear door height
94 inch interior width
81 inch width between fender wells
100 inch rear interior height
Double 3/4 inch treated ply wood floors
Side cargo barn doors
72 inches wide
90 inches tall
12,000 pound wireless remote control winch
Load & unload by winch
Jim
(260) 804-6695
August 25th
Available from POULSBO, WA 98370
Direct Enclosed Transport
Vehicle - Cargo - UTV - ATV - Tractor - Implement
My custom built heavy duty car hauler features:
Triple 5200 pound axles
8 inch full perimeter steel tube frame
14,000 pound GVWR
34 feet fully enclosed
8000 pound capacity
22 inch rear door loading height
88 inch wide rear door width
94 inch rear door height
94 inch interior width
81 inch width between fender wells
100 inch rear interior height
Double 3/4 inch treated ply wood floors
Side cargo barn doors
72 inches wide
90 inches tall
12,000 pound wireless remote control winch
Load & unload by winch
Jim
(260) 804-6695
Last edited by Trulyvintage on August 29th, 2015, 12:49 pm, edited 1 time in total.
-
- Posts: 964
- Joined: April 5th, 2011, 3:28 am
- Body Type: Model A
- Model Year: 1930
- Location: OH to TX to Seattle hauling now
- Contact:
This trip is done
This trip is done
August 25th
Available from POULSBO, WA 98370
I have vehicles waiting to be picked up in:
Butler, PA 16001
Clinton, IL 61727
I would prefer to transport to either of those locations ...
But I can travel to anywhere in the lower 48 states
Direct Enclosed Transport
Vehicle - Cargo - UTV - ATV - Tractor - Implement
My custom built heavy duty car hauler features:
Triple 5200 pound axles
8 inch full perimeter steel tube frame
14,000 pound GVWR
34 feet fully enclosed
8000 pound capacity
22 inch rear door loading height
88 inch wide rear door width
94 inch rear door height
94 inch interior width
81 inch width between fender wells
100 inch rear interior height
Double 3/4 inch treated ply wood floors
Side cargo barn doors
72 inches wide
90 inches tall
12,000 pound wireless remote control winch
Load & unload by winch
Jim
(260) 804-6695
August 25th
Available from POULSBO, WA 98370
I have vehicles waiting to be picked up in:
Butler, PA 16001
Clinton, IL 61727
I would prefer to transport to either of those locations ...
But I can travel to anywhere in the lower 48 states
Direct Enclosed Transport
Vehicle - Cargo - UTV - ATV - Tractor - Implement
My custom built heavy duty car hauler features:
Triple 5200 pound axles
8 inch full perimeter steel tube frame
14,000 pound GVWR
34 feet fully enclosed
8000 pound capacity
22 inch rear door loading height
88 inch wide rear door width
94 inch rear door height
94 inch interior width
81 inch width between fender wells
100 inch rear interior height
Double 3/4 inch treated ply wood floors
Side cargo barn doors
72 inches wide
90 inches tall
12,000 pound wireless remote control winch
Load & unload by winch
Jim
(260) 804-6695
Last edited by Trulyvintage on August 29th, 2015, 12:48 pm, edited 1 time in total.
-
- Posts: 964
- Joined: April 5th, 2011, 3:28 am
- Body Type: Model A
- Model Year: 1930
- Location: OH to TX to Seattle hauling now
- Contact:
This trip is done
This trip is done
August 25th
Just dropped off ...
Available now to haul from Seattle, WA ....
Jim
(260) 804-6695
August 25th
Just dropped off ...
Available now to haul from Seattle, WA ....
Jim
(260) 804-6695
Last edited by Trulyvintage on August 29th, 2015, 12:47 pm, edited 1 time in total.
-
- Posts: 964
- Joined: April 5th, 2011, 3:28 am
- Body Type: Model A
- Model Year: 1930
- Location: OH to TX to Seattle hauling now
- Contact:
This trip is done
This trip is done
August 27th
Available now from Renton, WA just south of Seattle ....
Jim
(260) 804-6695
August 27th
Available now from Renton, WA just south of Seattle ....
Jim
(260) 804-6695
Last edited by Trulyvintage on August 29th, 2015, 12:47 pm, edited 1 time in total.
-
- Posts: 964
- Joined: April 5th, 2011, 3:28 am
- Body Type: Model A
- Model Year: 1930
- Location: OH to TX to Seattle hauling now
- Contact:
This trip is done
This trip is done
August 30th
16 feet enclosed
4000 pound capacity
Leaving Renton, WA for Roseburg, OR
Continuing east to Bryn Mawr, PA
Pick up & drop off must be along my route ....
Click Here For Map Of Route @ http://mapq.st/1PZNF7Q
Thanks!
Jim
(260) 804-6695
August 30th
16 feet enclosed
4000 pound capacity
Leaving Renton, WA for Roseburg, OR
Continuing east to Bryn Mawr, PA
Pick up & drop off must be along my route ....
Click Here For Map Of Route @ http://mapq.st/1PZNF7Q
Thanks!
Jim
(260) 804-6695
Last edited by Trulyvintage on September 5th, 2015, 5:43 am, edited 1 time in total.
-
- Posts: 964
- Joined: April 5th, 2011, 3:28 am
- Body Type: Model A
- Model Year: 1930
- Location: OH to TX to Seattle hauling now
- Contact:
This trip is done
This trip is done
September 2nd
Leaving Winnemucca, NV in the morning ...
Jim
(260) 804-6695
September 2nd
Leaving Winnemucca, NV in the morning ...
Jim
(260) 804-6695
Last edited by Trulyvintage on September 5th, 2015, 5:42 am, edited 1 time in total.
-
- Posts: 964
- Joined: April 5th, 2011, 3:28 am
- Body Type: Model A
- Model Year: 1930
- Location: OH to TX to Seattle hauling now
- Contact:
This trip is done
This trip is done
September 5th
Leaving Cheyenne, WY around 10:00 a.m. local time
Routing thru Greeley, CO but can pick up in the Denver area
Continuing thru Kansas & Missouri along US 36
I have about 12 feet of room available
I can drop down to I-70 to pick up & drop off if needed
Click Here For Map @ http://mapq.st/1UtkDn4
Thanks !
Jim
(260) 804-6695
September 5th
Leaving Cheyenne, WY around 10:00 a.m. local time
Routing thru Greeley, CO but can pick up in the Denver area
Continuing thru Kansas & Missouri along US 36
I have about 12 feet of room available
I can drop down to I-70 to pick up & drop off if needed
Click Here For Map @ http://mapq.st/1UtkDn4
Thanks !
Jim
(260) 804-6695
Last edited by Trulyvintage on September 21st, 2015, 3:25 am, edited 1 time in total.
-
- Posts: 964
- Joined: April 5th, 2011, 3:28 am
- Body Type: Model A
- Model Year: 1930
- Location: OH to TX to Seattle hauling now
- Contact:
This trip is done
This trip is done
September 10th
I am in Lancaster, PA for a few days ....
Available to haul anywhere from here.
I can pick up in surrounding states ...
Jim
(260) 804-6695
September 10th
I am in Lancaster, PA for a few days ....
Available to haul anywhere from here.
I can pick up in surrounding states ...
Jim
(260) 804-6695
Last edited by Trulyvintage on September 21st, 2015, 3:24 am, edited 1 time in total.
-
- Posts: 964
- Joined: April 5th, 2011, 3:28 am
- Body Type: Model A
- Model Year: 1930
- Location: OH to TX to Seattle hauling now
- Contact:
This trip is done
This trip is done
September 16th
Leaving Lancaster, PA empty for Chester, NY
Picking up & heading to Proctorville, OH
Room for a smaller vehicle to Ohio & further ....
Click Here For Map @ http://mapq.st/1M5pALj
Jim
(260) 804-6695
September 16th
Leaving Lancaster, PA empty for Chester, NY
Picking up & heading to Proctorville, OH
Room for a smaller vehicle to Ohio & further ....
Click Here For Map @ http://mapq.st/1M5pALj
Jim
(260) 804-6695
Last edited by Trulyvintage on September 21st, 2015, 3:23 am, edited 1 time in total.
-
- Posts: 964
- Joined: April 5th, 2011, 3:28 am
- Body Type: Model A
- Model Year: 1930
- Location: OH to TX to Seattle hauling now
- Contact:
This trip is done
This trip is done
September 20th
Available from Charleston, WV
Direct Enclosed Transport
Vehicle - Cargo - UTV - ATV - Tractor - Implement
My custom built heavy duty car hauler features:
Triple 5200 pound axles
8 inch full perimeter steel tube frame
14,000 pound GVWR
34 feet fully enclosed
8000 pound capacity
22 inch rear door loading height
88 inch wide rear door width
94 inch rear door height
94 inch interior width
81 inch width between fender wells
100 inch rear interior height
Double 3/4 inch treated ply wood floors
Side cargo barn doors
72 inches wide
90 inches tall
12,000 pound wireless remote control winch
Load & unload by winch
Jim
(260) 804-6695
September 20th
Available from Charleston, WV
Direct Enclosed Transport
Vehicle - Cargo - UTV - ATV - Tractor - Implement
My custom built heavy duty car hauler features:
Triple 5200 pound axles
8 inch full perimeter steel tube frame
14,000 pound GVWR
34 feet fully enclosed
8000 pound capacity
22 inch rear door loading height
88 inch wide rear door width
94 inch rear door height
94 inch interior width
81 inch width between fender wells
100 inch rear interior height
Double 3/4 inch treated ply wood floors
Side cargo barn doors
72 inches wide
90 inches tall
12,000 pound wireless remote control winch
Load & unload by winch
Jim
(260) 804-6695
Last edited by Trulyvintage on September 21st, 2015, 3:23 am, edited 1 time in total.
-
- Posts: 964
- Joined: April 5th, 2011, 3:28 am
- Body Type: Model A
- Model Year: 1930
- Location: OH to TX to Seattle hauling now
- Contact:
This trip is done
This trip is done
September 17th
Leaving Lancaster, PA early morning for Chester, NY
Then to Proctorville, OH ....
Then to Clinton, IL .....
14 feet of enclosed trailer space is available
My route here @ http://mapq.st/1KfB7Hj
Jim
(260) 804-6695
September 17th
Leaving Lancaster, PA early morning for Chester, NY
Then to Proctorville, OH ....
Then to Clinton, IL .....
14 feet of enclosed trailer space is available
My route here @ http://mapq.st/1KfB7Hj
Jim
(260) 804-6695
Last edited by Trulyvintage on September 21st, 2015, 3:22 am, edited 1 time in total.
-
- Posts: 964
- Joined: April 5th, 2011, 3:28 am
- Body Type: Model A
- Model Year: 1930
- Location: OH to TX to Seattle hauling now
- Contact:
This trip is done
This trip is done
September 21st
Empty enclosed trailer leaving Proctorville, OH for Clinton, IL this afternoon ....
My Route Here @ http://mapq.st/1Fp47xv
Jim
(260) 804-6695
September 21st
Empty enclosed trailer leaving Proctorville, OH for Clinton, IL this afternoon ....
My Route Here @ http://mapq.st/1Fp47xv
Jim
(260) 804-6695
Last edited by Trulyvintage on September 23rd, 2015, 2:42 pm, edited 1 time in total.
-
- Posts: 964
- Joined: April 5th, 2011, 3:28 am
- Body Type: Model A
- Model Year: 1930
- Location: OH to TX to Seattle hauling now
- Contact:
This trip is done
This trip is done
October 1st
Available from Great Falls, MT
I can pick up in Idaho - Oregon - Washington - Dakotas
Direct Enclosed Transport
Vehicle - Cargo - UTV - ATV - Tractor - Implement
My custom built heavy duty car hauler features:
Triple 5200 pound axles
8 inch full perimeter steel tube frame
14,000 pound GVWR
34 feet fully enclosed
8000 pound capacity
88 inch wide rear door width
94 inch rear door height
94 inch interior width
81 inch width between fender wells
100 inch rear interior height
Double 3/4 inch treated ply wood floors
Side cargo barn doors
72 inches wide
90 inches tall
12,000 pound wireless remote control winch
Load & unload by winch
Thanks!
Jim
(260) 804-6695
October 1st
Available from Great Falls, MT
I can pick up in Idaho - Oregon - Washington - Dakotas
Direct Enclosed Transport
Vehicle - Cargo - UTV - ATV - Tractor - Implement
My custom built heavy duty car hauler features:
Triple 5200 pound axles
8 inch full perimeter steel tube frame
14,000 pound GVWR
34 feet fully enclosed
8000 pound capacity
88 inch wide rear door width
94 inch rear door height
94 inch interior width
81 inch width between fender wells
100 inch rear interior height
Double 3/4 inch treated ply wood floors
Side cargo barn doors
72 inches wide
90 inches tall
12,000 pound wireless remote control winch
Load & unload by winch
Thanks!
Jim
(260) 804-6695
Last edited by Trulyvintage on October 10th, 2015, 6:31 am, edited 1 time in total.
-
- Posts: 964
- Joined: April 5th, 2011, 3:28 am
- Body Type: Model A
- Model Year: 1930
- Location: OH to TX to Seattle hauling now
- Contact:
This trip is done
This trip is done
September 30th
Leaving Viroqua, WI for Baldwin, WI
Picking up a car & heading to Keller, TX
I have up to 14 feet of room & 3500 pound capacity available
My Trip Here @ http://mapq.st/1QFUuv1
Jim
(260) 804-6695
September 30th
Leaving Viroqua, WI for Baldwin, WI
Picking up a car & heading to Keller, TX
I have up to 14 feet of room & 3500 pound capacity available
My Trip Here @ http://mapq.st/1QFUuv1
Jim
(260) 804-6695
Last edited by Trulyvintage on October 10th, 2015, 6:31 am, edited 1 time in total.