Direct enclosed transport since 2011 on the AA Forum ....
-
- Posts: 964
- Joined: April 5th, 2011, 3:28 am
- Body Type: Model A
- Model Year: 1930
- Location: OH to TX to Seattle hauling now
- Contact:
This trip is done
This trip is done
October 3rd
Available from Great Falls, MT to Baldwin, WI
just outside of Minneapolis, MN
Direct Enclosed Transport
Vehicle - Cargo - UTV - ATV - Tractor - Implement
My custom built heavy duty car hauler features:
Triple 5200 pound axles
8 inch full perimeter steel tube frame
14,000 pound GVWR
34 feet fully enclosed
8000 pound capacity
88 inch wide rear door width
94 inch rear door height
94 inch interior width
81 inch width between fender wells
100 inch rear interior height
Double 3/4 inch treated ply wood floors
Side cargo barn doors
72 inches wide
90 inches tall
12,000 pound wireless remote control winch
Load & unload by winch
Jim
(260) 804-6695
October 3rd
Available from Great Falls, MT to Baldwin, WI
just outside of Minneapolis, MN
Direct Enclosed Transport
Vehicle - Cargo - UTV - ATV - Tractor - Implement
My custom built heavy duty car hauler features:
Triple 5200 pound axles
8 inch full perimeter steel tube frame
14,000 pound GVWR
34 feet fully enclosed
8000 pound capacity
88 inch wide rear door width
94 inch rear door height
94 inch interior width
81 inch width between fender wells
100 inch rear interior height
Double 3/4 inch treated ply wood floors
Side cargo barn doors
72 inches wide
90 inches tall
12,000 pound wireless remote control winch
Load & unload by winch
Jim
(260) 804-6695
Last edited by Trulyvintage on October 4th, 2015, 4:38 pm, edited 1 time in total.
-
- Posts: 964
- Joined: April 5th, 2011, 3:28 am
- Body Type: Model A
- Model Year: 1930
- Location: OH to TX to Seattle hauling now
- Contact:
This trip is done
This trip is done
October 6th
Leaving Baldwin, WI ....
Picking up a car & heading to Keller, TX
I have up to 14 feet of room & 3500 pound capacity available
My Trip Here @ http://mapq.st/1JNilUe
Jim
(260) 804-6695
October 6th
Leaving Baldwin, WI ....
Picking up a car & heading to Keller, TX
I have up to 14 feet of room & 3500 pound capacity available
My Trip Here @ http://mapq.st/1JNilUe
Jim
(260) 804-6695
- Attachments
-
- IMG_2934.JPG (163.08 KiB) Viewed 7041 times
Last edited by Trulyvintage on October 10th, 2015, 6:30 am, edited 1 time in total.
-
- Posts: 964
- Joined: April 5th, 2011, 3:28 am
- Body Type: Model A
- Model Year: 1930
- Location: OH to TX to Seattle hauling now
- Contact:
This trip is done
This trip is done
October 11th
Leaving Idabel, OK ....
Heading to Menlo Park, CA
I have up to 14 feet of room & 3500 pound capacity available
My Trip Here @ http://mapq.st/1jVAD0F
Jim
(260) 804-6695
October 11th
Leaving Idabel, OK ....
Heading to Menlo Park, CA
I have up to 14 feet of room & 3500 pound capacity available
My Trip Here @ http://mapq.st/1jVAD0F
Jim
(260) 804-6695
Last edited by Trulyvintage on October 15th, 2015, 5:55 pm, edited 1 time in total.
-
- Posts: 964
- Joined: April 5th, 2011, 3:28 am
- Body Type: Model A
- Model Year: 1930
- Location: OH to TX to Seattle hauling now
- Contact:
This trip is done
This tip is done
October 12th
I will in Albuquerque, NM .....
Jim
(260) 804-6695
October 12th
I will in Albuquerque, NM .....
Jim
(260) 804-6695
Last edited by Trulyvintage on October 15th, 2015, 5:55 pm, edited 1 time in total.
-
- Posts: 964
- Joined: April 5th, 2011, 3:28 am
- Body Type: Model A
- Model Year: 1930
- Location: OH to TX to Seattle hauling now
- Contact:
This trip is done
This trip is done
October 14th
I will be in Flagstaff, AZ .....
Jim
(260) 804-6695
October 14th
I will be in Flagstaff, AZ .....
Jim
(260) 804-6695
Last edited by Trulyvintage on October 15th, 2015, 5:56 pm, edited 1 time in total.
-
- Posts: 964
- Joined: April 5th, 2011, 3:28 am
- Body Type: Model A
- Model Year: 1930
- Location: OH to TX to Seattle hauling now
- Contact:
This trip is done
This trip is done
October 14th
Limited room for sheet metal & parts - no heavy items ....
Leaving Phoenix, AZ in the morning
Driving thru Los Angeles up to Arroyo Grande, CA ....
Continuing to Paso Robles, CA ....
My Trip Route Is Here @ http://mapq.st/1jwRCpA
Jim
(260) 804-6695
October 14th
Limited room for sheet metal & parts - no heavy items ....
Leaving Phoenix, AZ in the morning
Driving thru Los Angeles up to Arroyo Grande, CA ....
Continuing to Paso Robles, CA ....
My Trip Route Is Here @ http://mapq.st/1jwRCpA
Jim
(260) 804-6695
Last edited by Trulyvintage on October 15th, 2015, 5:56 pm, edited 1 time in total.
-
- Posts: 964
- Joined: April 5th, 2011, 3:28 am
- Body Type: Model A
- Model Year: 1930
- Location: OH to TX to Seattle hauling now
- Contact:
This trip is done
This trip is done
October 18th
Leaving Santa Clara, CA for Charlotte, NC ...
Limited room for lightweight parts ....
Click Here For Map @ http://mapq.st/1LR0kM6
Jim
(260) 804-6695
October 18th
Leaving Santa Clara, CA for Charlotte, NC ...
Limited room for lightweight parts ....
Click Here For Map @ http://mapq.st/1LR0kM6
Jim
(260) 804-6695
Last edited by Trulyvintage on October 30th, 2015, 5:25 pm, edited 1 time in total.
-
- Posts: 964
- Joined: April 5th, 2011, 3:28 am
- Body Type: Model A
- Model Year: 1930
- Location: OH to TX to Seattle hauling now
- Contact:
Charlotte, NC enclosed auto transport 32 feet available !
October 31st
Available from Charlotte, NC
Direct Enclosed Transport
Vehicle - Cargo - UTV - ATV - Tractor - Implement
My custom built heavy duty car hauler features:
Triple 5200 pound axles
8 inch full perimeter steel tube frame
14,000 pound GVWR
32 feet fully enclosed
8000 pound capacity
22 inch rear door loading height
88 inch wide rear door width
94 inch rear door height
94 inch interior width
81 inch width between fender wells
100 inch rear interior height
Double 3/4 inch treated ply wood floors
Side cargo barn doors
72 inches wide
90 inches tall
12,000 pound wireless remote control winch
Load & unload by winch
Jim
(260) 804-6695
Available from Charlotte, NC
Direct Enclosed Transport
Vehicle - Cargo - UTV - ATV - Tractor - Implement
My custom built heavy duty car hauler features:
Triple 5200 pound axles
8 inch full perimeter steel tube frame
14,000 pound GVWR
32 feet fully enclosed
8000 pound capacity
22 inch rear door loading height
88 inch wide rear door width
94 inch rear door height
94 inch interior width
81 inch width between fender wells
100 inch rear interior height
Double 3/4 inch treated ply wood floors
Side cargo barn doors
72 inches wide
90 inches tall
12,000 pound wireless remote control winch
Load & unload by winch
Jim
(260) 804-6695
Last edited by Trulyvintage on October 30th, 2015, 5:25 pm, edited 1 time in total.
- Chris Haynes
- Posts: 2203
- Joined: September 7th, 2003, 5:18 pm
- Body Type: 82A
- Model Year: 1930
- Location: Camarillo, CA
Re: Direct enclosed transport since 2011 on the AA Forum ....
I have never seen a picture of a AA Ford in your trailer.
-
- Posts: 964
- Joined: April 5th, 2011, 3:28 am
- Body Type: Model A
- Model Year: 1930
- Location: OH to TX to Seattle hauling now
- Contact:
This trip is done
This trip is done
October 19th
Leaving Santa Clara, CA around 11:00 a.m.
Headed to Charlotte, NC
Limited room for lighter items http://mapq.st/1LyDrYD
Taking the I-10 corridor ....
Click Here For Map Of Route @
Jim
(260) 804-6695
October 19th
Leaving Santa Clara, CA around 11:00 a.m.
Headed to Charlotte, NC
Limited room for lighter items http://mapq.st/1LyDrYD
Taking the I-10 corridor ....
Click Here For Map Of Route @
Jim
(260) 804-6695
Last edited by Trulyvintage on October 30th, 2015, 5:26 pm, edited 1 time in total.
-
- Posts: 964
- Joined: April 5th, 2011, 3:28 am
- Body Type: Model A
- Model Year: 1930
- Location: OH to TX to Seattle hauling now
- Contact:
This trip is done
This trip is done
October 31st
Heading up to Lucas, OH from Charlotte, NC w/ empty trailer ...
Jim
(260) 804-6695
October 31st
Heading up to Lucas, OH from Charlotte, NC w/ empty trailer ...
Jim
(260) 804-6695
Last edited by Trulyvintage on November 5th, 2015, 12:47 pm, edited 2 times in total.
-
- Posts: 964
- Joined: April 5th, 2011, 3:28 am
- Body Type: Model A
- Model Year: 1930
- Location: OH to TX to Seattle hauling now
- Contact:
This trip is done
This trip is done
November 2nd
Leaving Lucas, OH for Las Vegas, NV ...
I have about 14 feet of enclosed trailer space available ...
I am taking I-40 ....
My Route Here @ http://mapq.st/1jXYKfB
Jim
(260) 804-6695
November 2nd
Leaving Lucas, OH for Las Vegas, NV ...
I have about 14 feet of enclosed trailer space available ...
I am taking I-40 ....
My Route Here @ http://mapq.st/1jXYKfB
Jim
(260) 804-6695
Last edited by Trulyvintage on November 5th, 2015, 12:47 pm, edited 1 time in total.
-
- Posts: 964
- Joined: April 5th, 2011, 3:28 am
- Body Type: Model A
- Model Year: 1930
- Location: OH to TX to Seattle hauling now
- Contact:
This trip is done
This trip is done
November 6th
Leaving Knoxville, TN for Tulsa, OK
I have about 13 feet of enclosed trailer space available
4000 pound capacity
I plan on taking I-40 west ...
My Route Here @ http://mapq.st/1MLaO00
Jim
(260) 804-6695
November 6th
Leaving Knoxville, TN for Tulsa, OK
I have about 13 feet of enclosed trailer space available
4000 pound capacity
I plan on taking I-40 west ...
My Route Here @ http://mapq.st/1MLaO00
Jim
(260) 804-6695
Last edited by Trulyvintage on November 10th, 2015, 5:43 am, edited 1 time in total.
-
- Posts: 964
- Joined: April 5th, 2011, 3:28 am
- Body Type: Model A
- Model Year: 1930
- Location: OH to TX to Seattle hauling now
- Contact:
This trip is done
This trip is done
November 13th
Leaving Las Vegas, NV for Paso Robles, CA
Minimum 15 feet enclosed trailer space w/ 4000 pound capacity
Map Of Route Here @ http://mapq.st/20JDFWJ
Jim
(260) 804-6695
November 13th
Leaving Las Vegas, NV for Paso Robles, CA
Minimum 15 feet enclosed trailer space w/ 4000 pound capacity
Map Of Route Here @ http://mapq.st/20JDFWJ
Jim
(260) 804-6695
Last edited by Trulyvintage on November 23rd, 2015, 8:03 am, edited 1 time in total.
-
- Posts: 964
- Joined: April 5th, 2011, 3:28 am
- Body Type: Model A
- Model Year: 1930
- Location: OH to TX to Seattle hauling now
- Contact:
This trip is done
This trip is done
November 13th
Click Here For Map Of Route @ http://mapq.st/1NNShiG
Leaving Las Vegas, NV in the morning for Santa Rosa, CA
15 feet of room w/ 5000 pound capacity available
November 15th
Leaving Santa Rosa, CA for Orting, WA
32 feet of room w/ 8000 pound capacity available
Jim
(260) 804-6695
November 13th
Click Here For Map Of Route @ http://mapq.st/1NNShiG
Leaving Las Vegas, NV in the morning for Santa Rosa, CA
15 feet of room w/ 5000 pound capacity available
November 15th
Leaving Santa Rosa, CA for Orting, WA
32 feet of room w/ 8000 pound capacity available
Jim
(260) 804-6695
Last edited by Trulyvintage on November 23rd, 2015, 8:02 am, edited 1 time in total.