Need PTO for 1928 AA with 3-speed/2-speed set up

Here you can put your AA parts for sale, and wanted posts.
User avatar
Neil Wilson
Posts: 3062
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Re: Need PTO for 1928 AA with 3-speed/2-speed set up

Post by Neil Wilson »

Hello Truckman,
I assume that the two speed you reference is the Ford sold dual high (which is actually an under drive). You can install the four speed and keep the dual high with two special parts:

Rear Bearing Retainer AA-7085-B
Special u-joint A-7090-C (as indicated by Bob C)

Pictures are shown. These same parts are used to install a '28/'29 Warford behind a 4-speed
Attachments
xU-joint 4-speed to Warford 2.jpg
xU-joint 4-speed to Warford 2.jpg (43.22 KiB) Viewed 9030 times
xU-joint 4-speed to Warford 1.jpg
xU-joint 4-speed to Warford 1.jpg (45.81 KiB) Viewed 9030 times
x4-Speed Rear Bearing Retainer 1a2.jpg
x4-Speed Rear Bearing Retainer 1a2.jpg (49.72 KiB) Viewed 9030 times
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
User avatar
TruckMan
Posts: 132
Joined: March 10th, 2009, 10:36 am
Body Type: Garwood Dump
Model Year: 1928
Location: Wisconsin

Re: Need PTO for 1928 AA with 3-speed/2-speed set up

Post by TruckMan »

Thank you, Neil,

Now, are these parts as rare as hens teeth or is there a way that you know of to find them? Finding the 4-bolt PTO has been like searching for the Holy Grail and hoping for world peace at the same time.

Please advise.
TruckMan
User avatar
Neil Wilson
Posts: 3062
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Re: Need PTO for 1928 AA with 3-speed/2-speed set up

Post by Neil Wilson »

Both of these parts seem to be hard to find. I might have one of the rear bearing retainers to sell but not the u-joint. I have an AA truck with the four bolt PTO currently installed. The platform was modified to be used as a dump at some time. Too bad that the platform cross members were mostly destroyed since it is the first platform design with only four stake pockets on each side.
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
User avatar
Neil Wilson
Posts: 3062
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Re: Need PTO for 1928 AA with 3-speed/2-speed set up

Post by Neil Wilson »

BTW - The four speed will also require the AA clutch housing.
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
1929FORDAA
Posts: 3
Joined: July 24th, 2005, 9:28 pm
Model Year: 1930
Location: Brentwood,Northern Cal

Re: Need PTO for 1928 AA with 3-speed/2-speed set up

Post by 1929FORDAA »

If you are still looking for a 4 bolt PTO I have one for sale , Came off a 29 AA with 3 speed/2 speed, Great working shape,Not wornout, $200.00 , thanks
User avatar
TruckMan
Posts: 132
Joined: March 10th, 2009, 10:36 am
Body Type: Garwood Dump
Model Year: 1928
Location: Wisconsin

Re: Need PTO for 1928 AA with 3-speed/2-speed set up

Post by TruckMan »

YES! I am still looking. Can you send a pic? Where are you located?

(Sent you an email as well)
TruckMan
User avatar
TruckMan
Posts: 132
Joined: March 10th, 2009, 10:36 am
Body Type: Garwood Dump
Model Year: 1928
Location: Wisconsin

Re: Need PTO for 1928 AA with 3-speed/2-speed set up

Post by TruckMan »

Alright, I see it now. California. Shipping should not be too bad. I'm in Wisconsin.
TruckMan
User avatar
vtwinsideways
Posts: 452
Joined: March 19th, 2010, 6:37 pm
Body Type: 82-A, 88-A
Model Year: 1929
Location: Taylorville IL

Re: Need PTO for 1928 AA with 3-speed/2-speed set up

Post by vtwinsideways »

Deleted
Last edited by vtwinsideways on January 13th, 2011, 11:07 am, edited 2 times in total.
"I get all my exercise jumping to conclusions."
Luke in Illinois
User avatar
Chris Haynes
Posts: 2203
Joined: September 7th, 2003, 5:18 pm
Body Type: 82A
Model Year: 1930
Location: Camarillo, CA

Re: Need PTO for 1928 AA with 3-speed/2-speed set up

Post by Chris Haynes »

TruckMan wrote:I put an ad on Fordbarn for the 4-bolt PTO. Some man from London, England says he has one, $205 ups next day. I hope this is for real. He wanted western union but I replied "Visa" so I would have some recourse if I never received. I've been looking on and off for several years to find one, so I'm tempted to buy it.

I bought my first pick up truck, a '61 Chevy, for $220 at an auction and drove it home. Prices do change.

Those London replies are all bogus. Ask him for a picture of the unit and you will either get no reply or a reply saying that he is having technical difficulties and can't send a picture.
User avatar
Neil Wilson
Posts: 3062
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Re: Need PTO for 1928 AA with 3-speed/2-speed set up

Post by Neil Wilson »

Regarding the England source for parts - There is a club member in England (John Charlton) and we have bought and sold parts. If you want to provide the contact information (like address and phone number) of the person you are trying to deal with, I will e-mail John to see if he can determine if your guy is okay!
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
User avatar
TruckMan
Posts: 132
Joined: March 10th, 2009, 10:36 am
Body Type: Garwood Dump
Model Year: 1928
Location: Wisconsin

Re: Need PTO for 1928 AA with 3-speed/2-speed set up

Post by TruckMan »

Hey '29, are you out there?
TruckMan
User avatar
TruckMan
Posts: 132
Joined: March 10th, 2009, 10:36 am
Body Type: Garwood Dump
Model Year: 1928
Location: Wisconsin

Re: Need PTO for 1928 AA with 3-speed/2-speed set up

Post by TruckMan »

Whoever "1929FORDAA" is, I wish that you would contact me.

I am still looking for a 4-bolt PTO.
TruckMan
Drew Mashburn
Posts: 496
Joined: April 25th, 2005, 2:25 pm
Model Year: 1930
Location: Ojai, California

Re: Need PTO for 1928 AA with 3-speed/2-speed set up

Post by Drew Mashburn »

Chris:

Did I miss something? Where did you get "London"? The person that identifies himself/herself as "1929FORDAA" has a profile that says he's/she's from Brentwood, Northern California.

-- Drew
Drew Mashburn
User avatar
Chris Haynes
Posts: 2203
Joined: September 7th, 2003, 5:18 pm
Body Type: 82A
Model Year: 1930
Location: Camarillo, CA

Re: Need PTO for 1928 AA with 3-speed/2-speed set up

Post by Chris Haynes »

Drew Mashburn wrote:Chris:

Did I miss something? Where did you get "London"? The person that identifies himself/herself as "1929FORDAA" has a profile that says he's/she's from Brentwood, Northern California.

-- Drew
This is what I was replying to. I even quoted it.
TruckMan wrote:
I put an ad on Fordbarn for the 4-bolt PTO. Some man from London, England says he has one, $205 ups next day. I hope this is for real. He wanted western union but I replied "Visa" so I would have some recourse if I never received. I've been looking on and off for several years to find one, so I'm tempted to buy it.

I never mentioned "1929FORDAA".
Time to clean yer specs. :D
Drew Mashburn
Posts: 496
Joined: April 25th, 2005, 2:25 pm
Model Year: 1930
Location: Ojai, California

Re: Need PTO for 1928 AA with 3-speed/2-speed set up

Post by Drew Mashburn »

Chris:

You're right, need to clean my specs. I didn't see that. Looks like TruckMan may have finally located a 4-bolt PTO. Good for him!

-- Drew
Drew Mashburn
Post Reply