5:14 speedo drive gear

russ · Post by **russ** » October 12th, 2009, 7:54 pm

Has anyone got a good 5:14 speedo drive gear i can purchase? Parts inspection reveals mine has lost it's cogs that ride in the drive shaft grooves.

Best, russ

Bob C · Post by **Bob C** » October 12th, 2009, 10:26 pm

Russ,
That one looks OK. If it spins on the splines when you put it on the drive shaft
it is probably off a BB. Somebody put a BB one on my AA and it would just spin on the
spline as the BB splines are bigger.

russ · Post by **russ** » October 13th, 2009, 12:26 am

That's likely what it is then. Did you fit up a BB driveshaft in it, or find the proper AA drive gear?

Neil Wilson · Post by **Neil Wilson** » October 13th, 2009, 6:41 am

Hello Russ,
I received an e-mail via the forums and I think it is from you regarding brake shoe rollers. The e-mail address is rja921@pacbell.net and my e-mail back to you came back as not deliverable. So, send me an e-mail with your usable e-mail address. It must be that your e-mail address on the forums is wrong.

I do have some brake shoe rollers.

Bob C · Post by **Bob C** » October 13th, 2009, 10:05 am

I had to find a AA gear, the BB drive line is bigger from the trans u-joint
back to the pinion gear.

russ · Post by **russ** » October 13th, 2009, 10:39 am

Thanks Neil, correcting brain fart now.

Robert Gray · Post by **Robert Gray** » October 15th, 2009, 5:15 am

I have one you can have. Send me your mailing address and I will send it on. Just reimburse actual shipping cost when you get it.

I need a 5.14 driven gear if anyone has one for sale or trade.

russ · Post by **russ** » October 15th, 2009, 1:16 pm

That's a tremendous offer Robert. Mailing address details are..
Russell Anderson
3347 Elmore St.
Simi Valley, Ca 93063

A thousand thanks.

russ · Post by **russ** » October 15th, 2009, 5:28 pm

Robert, if you include the gear that goes on the speedo cable i'll even cash in my coke cans for ya.

Just kidding, i plan to send ya some coin anyway for your trouble.

Saw your profile as retired ships pilot. Were you on the oceans or rivers?

Robert Gray · Post by **Robert Gray** » October 15th, 2009, 6:09 pm

Thats the part I need a new one of !!!...the are a few worn spots on my driven gear

I have pilotage for Cook Inlet, AK and was a Panama Canal Pilot for 20 plus years.

No just the postage is cool......pass it on down the line..we all have some part laying around taking up space that someone else really needs...sort of a from each to each kind of thing!!

it will be in the mail tommorrow AM let me know when it gets there

Bob

russ · Post by **russ** » October 16th, 2009, 11:41 am

Outstanding Robert. Thanks again.

Movin' ships in tight quarters, now there's some major responsiblility. I bet you've got some good stories.

Robert Gray · Post by **Robert Gray** » October 16th, 2009, 12:30 pm

i guess you know the difference between a sea story and a fairy tale ??

A fairy tale starts "once upon a time...." and a sea story starts "Now this is no s**t ....! !!"

russ · Post by **russ** » October 17th, 2009, 12:12 am

russ · Post by **russ** » October 20th, 2009, 1:47 pm

An excellent speedo gear has been procured through Mr Robert Gray. Thanks so much Robert. The project moves forward again.

aa-fords.com

5:14 speedo drive gear

5:14 speedo drive gear

Re: 5:14 speedo drive gear

Re: 5:14 speedo drive gear

Re: 5:14 speedo drive gear

Re: 5:14 speedo drive gear

Re: 5:14 speedo drive gear

Re: 5:14 speedo drive gear

Re: 5:14 speedo drive gear

Re: 5:14 speedo drive gear

Re: 5:14 speedo drive gear

Re: 5:14 speedo drive gear

Re: 5:14 speedo drive gear

Re: 5:14 speedo drive gear

Re: 5:14 speedo drive gear