PARTS FOR SALE
PARTS FOR SALE
My brother-inlaw is working on a AA ford truck. He has some parts he is interesed in selling.
Complete rear axle assembly Hub to Hub, and drive shaft assembly up to transmission. (he's keeping the rear springs).
$100.00
Radiator is in good condition and for sale also.
$100.00
All these parts came off of a 31 AA. The truck ran in the early 90's and has been in a barn every since. All the parts are in good condition.
If you are interested in talking to me call my cell phone 1-812-499-6405, or e-mail me leadfoot82@live.com
We are located in southern Indiana in the town of Newburgh, about 5 to 10 miles East of Evansville In.
Complete rear axle assembly Hub to Hub, and drive shaft assembly up to transmission. (he's keeping the rear springs).
$100.00
Radiator is in good condition and for sale also.
$100.00
All these parts came off of a 31 AA. The truck ran in the early 90's and has been in a barn every since. All the parts are in good condition.
If you are interested in talking to me call my cell phone 1-812-499-6405, or e-mail me leadfoot82@live.com
We are located in southern Indiana in the town of Newburgh, about 5 to 10 miles East of Evansville In.
Last edited by LEADFOOT on November 16th, 2009, 5:55 am, edited 1 time in total.
- Chris Haynes
- Posts: 2203
- Joined: September 7th, 2003, 5:18 pm
- Body Type: 82A
- Model Year: 1930
- Location: Camarillo, CA
Re: PARTS FOR SALE
Sadly it appears that another AA is biting the dust to become a hot rod.
- Brady
- Posts: 361
- Joined: October 21st, 2003, 1:38 pm
- Body Type: None
- Model Year: 1930
- Location: Norwich, NY 13815
Re: PARTS FOR SALE
Chris: It sure looks that way, but at least the guy is offering to sell the parts not being used. Being from southern Illinois, they're probably in pretty good shape, and not ruined by the northeast road salt. It'll likely turn out to be another rat joke from the tattootards. I'd like to see that by now the band-wagon of "chopper junk" would have run aground in some neck trailer park, but it takes awhile for a different carrot to be dangled in front of their noses.
-
- Posts: 409
- Joined: January 15th, 2003, 11:48 pm
- Body Type: 82a
- Model Year: 1930
- Location: planet earth
Re: PARTS FOR SALE
I've seen some AA's that were so far gone they were good fer nuthin' but parts, and maybe this was one of them.
If it is becoming a rod, i hope it's a beaut because hot rods are cool too.
If it is becoming a rod, i hope it's a beaut because hot rods are cool too.
Everybody likes pics.
Re: PARTS FOR SALE
It also could be the other alternative, he could be converting it to an A truck.
- rollingsculpture
- Posts: 553
- Joined: December 9th, 2008, 7:30 am
- Body Type: platform
- Model Year: 1931
- Location: Takoma Park maryland
Re: PARTS FOR SALE
its a mystery why anyone would want to hot rod a AA frame , with it being heavier than an A frame , may as well just take the sheet metal and drop it on the rest of the rod gear and sell off the whole frame as a roller , much more useful for everyone and less to take apart.
- spectria
- Posts: 1874
- Joined: May 15th, 2008, 9:53 pm
- Body Type: Mail Truck, Stakebed
- Model Year: 1931
- Location: Quincy, Ca.
Re: PARTS FOR SALE
I'm not a fan of Hot Rodding our beloved AA's, but since you have to box the standard A frame or shell out for a custom frame, why not use the heavier AA frame if the rest of the truck is crap?rollingsculpture wrote:its a mystery why anyone would want to hot rod a AA frame , with it being heavier than an A frame , may as well just take the sheet metal and drop it on the rest of the rod gear and sell off the whole frame as a roller , much more useful for everyone and less to take apart.
I am glad he is offering the parts for sale here...Better than them being made into a Hyundai...
Dave in Quincy, Ca. I love Pics!!!! Post them All!!!
Join the Ford Model AA Truck Club - membership form at http://www.fmaatc.org
Join the Ford Model AA Truck Club - membership form at http://www.fmaatc.org
Re: PARTS FOR SALE
This fellow promised to sell me the wheels & tires last week, and now he refuses to reply to my email. It appears that he has sold them out from under me.
I wonder if he is a used car salesman.
I wonder if he is a used car salesman.
- spectria
- Posts: 1874
- Joined: May 15th, 2008, 9:53 pm
- Body Type: Mail Truck, Stakebed
- Model Year: 1931
- Location: Quincy, Ca.
Re: PARTS FOR SALE
The Prices did seem to be too good to be true...E.Moore wrote:This fellow promised to sell me the wheels & tires last week, and now he refuses to reply to my email. It appears that he has sold them out from under me.
I wonder if he is a used car salesman.
Dave in Quincy, Ca. I love Pics!!!! Post them All!!!
Join the Ford Model AA Truck Club - membership form at http://www.fmaatc.org
Join the Ford Model AA Truck Club - membership form at http://www.fmaatc.org
-
- Posts: 375
- Joined: November 15th, 2008, 8:18 am
- Body Type: 186 stake
- Model Year: 1931
- Location: Hawthorne California
Re: PARTS FOR SALE
I always worry about someone selling something for another person. It was a heck of a deal if for real.
- spectria
- Posts: 1874
- Joined: May 15th, 2008, 9:53 pm
- Body Type: Mail Truck, Stakebed
- Model Year: 1931
- Location: Quincy, Ca.
Re: PARTS FOR SALE
Eric, I just called the guy and spoke to him and he told me only the axle and radiator are still there, that "Some guy came by last week and bought everything else".E.Moore wrote:This fellow promised to sell me the wheels & tires last week, and now he refuses to reply to my email. It appears that he has sold them out from under me.
I wonder if he is a used car salesman.
I think he promised you and then took the cash that rolled in the driveway...
It happens, but it's a Biatch when it happens to you.
Dave in Quincy, Ca. I love Pics!!!! Post them All!!!
Join the Ford Model AA Truck Club - membership form at http://www.fmaatc.org
Join the Ford Model AA Truck Club - membership form at http://www.fmaatc.org
- TomH
- Posts: 181
- Joined: September 16th, 2009, 2:11 pm
- Body Type: pickup
- Model Year: 1928
- Location: Eastern PA
Re: PARTS FOR SALE
Eric, Shorthaul, Spectria, etc.
I am the guy who bought the tires, rims, front axle and trans. I needed the tires for my truck. I have an old home made produce huckster trailer, with a chevy axle. I always wanted to pull that trailer with my truck, and it will look much better with the AA axle under it. I bought the trans, cause mine has an issue with the reverse lockout, and this one works much better. And I guess, I bought all the other 4 wheels hoping to be able to trade for parts I need for my truck, or to sell to help offset the $300 gas bill for the 1550 mile trip. Also he threw in a few other parts. I haven't gone through everything yet, but when I do I will list the parts I can't use. I do know that there is a steering box, which is totally different than mine, and an intermediate shaft.
He wasn't a used car dealer, and seemed like a very nice guy.
I wasn't trying to steel anything out from under anyone. I simply made a call, told the man what I was interested in, and he told me to come get it. So my friend and I left here Thurs. evening at 8:00 PM and returned Sat morning at 1:00 AM.
Just thought I would set the record straight.
Tom H
I am the guy who bought the tires, rims, front axle and trans. I needed the tires for my truck. I have an old home made produce huckster trailer, with a chevy axle. I always wanted to pull that trailer with my truck, and it will look much better with the AA axle under it. I bought the trans, cause mine has an issue with the reverse lockout, and this one works much better. And I guess, I bought all the other 4 wheels hoping to be able to trade for parts I need for my truck, or to sell to help offset the $300 gas bill for the 1550 mile trip. Also he threw in a few other parts. I haven't gone through everything yet, but when I do I will list the parts I can't use. I do know that there is a steering box, which is totally different than mine, and an intermediate shaft.
He wasn't a used car dealer, and seemed like a very nice guy.
I wasn't trying to steel anything out from under anyone. I simply made a call, told the man what I was interested in, and he told me to come get it. So my friend and I left here Thurs. evening at 8:00 PM and returned Sat morning at 1:00 AM.
Just thought I would set the record straight.
Tom H
Need rear fenders and running boards for 1932 131" single wheel Express Body
-
- Posts: 375
- Joined: November 15th, 2008, 8:18 am
- Body Type: 186 stake
- Model Year: 1931
- Location: Hawthorne California
Re: PARTS FOR SALE
Tom,
I guess that's what is meant about being only a phone call away
It's a done deal and you done good.
Where do you live, just curios.
I guess that's what is meant about being only a phone call away
It's a done deal and you done good.
Where do you live, just curios.
- spectria
- Posts: 1874
- Joined: May 15th, 2008, 9:53 pm
- Body Type: Mail Truck, Stakebed
- Model Year: 1931
- Location: Quincy, Ca.
Re: PARTS FOR SALE
It's good to know someone in the community got the parts...
I didn't mean anything negative about the first guy in the driveway, that's how it is, first come first served...
You got a great deal on those tires and wheels!!!!
I didn't mean anything negative about the first guy in the driveway, that's how it is, first come first served...
You got a great deal on those tires and wheels!!!!
Dave in Quincy, Ca. I love Pics!!!! Post them All!!!
Join the Ford Model AA Truck Club - membership form at http://www.fmaatc.org
Join the Ford Model AA Truck Club - membership form at http://www.fmaatc.org
- TomH
- Posts: 181
- Joined: September 16th, 2009, 2:11 pm
- Body Type: pickup
- Model Year: 1928
- Location: Eastern PA
Re: PARTS FOR SALE
Shorthaul,
I am in eastern PA. I should also add that in one of our phone conversations, he asked me if I needed a flat bed. I didn't see the bed, but the rest of the truck was in good condition, so if anyone needs that, they might want to give him a call.
Tom
I am in eastern PA. I should also add that in one of our phone conversations, he asked me if I needed a flat bed. I didn't see the bed, but the rest of the truck was in good condition, so if anyone needs that, they might want to give him a call.
Tom
Need rear fenders and running boards for 1932 131" single wheel Express Body