Companion flange
-
Mike in Maine
- Posts: 188
- Joined: November 17th, 2004, 1:54 pm
- Body Type: 82B
- Model Year: 1931
- Location: Alfred, Maine
Companion flange
Differential joint assembly. long flange 1 3/8"-10 spline(drive pinion). Short flange 1 1/4"-6 spline(transmission). I am told it fits early V8 ford 1 1/2 ton trucks(mid to upper 30's). Would be great if I can get just the long 10 spline companion flange. It needs to fit a shortened AA that was made into a Doodle-Bug.
Re: Companion flange
Mike see the link below, I think this is what you are looking for.
http://cgi.ebay.com/ebaymotors/1928-192 ... ccessories
http://cgi.ebay.com/ebaymotors/1928-192 ... ccessories
-
tiredtruckrestorer
- Posts: 338
- Joined: April 20th, 2003, 7:09 pm
- Model Year: 1931
- Location: Orwigsburg, PA
Re: Companion flange
Hello Mike,
I believe I have what your looking for. The companion flange/hub has a 3 5/8" diameter face with six unthreaded bolt holes on a 3" diameter circle. The length of the hub is about 2 5/16" long including a small protrusion on the flange end of it. If this sounds like what your looking for leave me know.
Keith
I believe I have what your looking for. The companion flange/hub has a 3 5/8" diameter face with six unthreaded bolt holes on a 3" diameter circle. The length of the hub is about 2 5/16" long including a small protrusion on the flange end of it. If this sounds like what your looking for leave me know.
Keith