Anyone have one or know where to buy one? I completely destroyed mine in disassembly.
Thanks
Scott
Need Rear Radius Rod to torque tube Bolt
- Chris Haynes
- Posts: 2203
- Joined: September 7th, 2003, 5:18 pm
- Body Type: 82A
- Model Year: 1930
- Location: Camarillo, CA
Re: Need Rear Radius Rod to torque tube Bolt
Shouldn't be too hard to make on a lathe.
Re: Need Rear Radius Rod to torque tube Bolt
If you are not building the truck for show, those can be found at a good hardware store. The head will have modern fastener markings and won't be as thick as the original, but it wil work just fine.
I have a few orignal that are NOS. If interested, send an email to: aaford157@nosford.com
During removal of the old ones, once penetrating oil is used for several hours, if an air chisel is used with a long punch end, they will come out without damage to the bolt or threads.
I have a few orignal that are NOS. If interested, send an email to: aaford157@nosford.com
During removal of the old ones, once penetrating oil is used for several hours, if an air chisel is used with a long punch end, they will come out without damage to the bolt or threads.