April 1930 flatbed U-bolt needed.
- s147881
- Posts: 425
- Joined: April 13th, 2007, 8:09 pm
- Body Type: stake bed 82A
- Model Year: 1930
- Location: Decatur Michigan
April 1930 flatbed U-bolt needed.
I have a april 1930 flatbed truck. It has a small u-bolt in the back and middle to hold on the flatbed. The front has a couple of long bolts with plates. I am missing one of the rear u-bolts with the frame spacer. Does anyone have one they are willing to sell or trade. I have one extra middle one without the frame spacer if interested. It is fully derusted and ready for paint. Thanks
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: April 1930 flatbed U-bolt needed.
Attached is a picture showing the two brackets which should be bolted to the side-front of the 88-A platform. The side of the frame should have corresponding "L" brackets (inverted) riveted on. There would not be any long bolts originally.
Post a picture of the u-bolt you have and indicate the length.
Post a picture of the u-bolt you have and indicate the length.
- Attachments
-
- 088A-089A Mounting Hardware 3.jpg (53.44 KiB) Viewed 2021 times
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
- s147881
- Posts: 425
- Joined: April 13th, 2007, 8:09 pm
- Body Type: stake bed 82A
- Model Year: 1930
- Location: Decatur Michigan
Re: April 1930 flatbed U-bolt needed.
The u bolts are currently getting acid dipped. I should have them back next week and I will post some pics.
- s147881
- Posts: 425
- Joined: April 13th, 2007, 8:09 pm
- Body Type: stake bed 82A
- Model Year: 1930
- Location: Decatur Michigan
Re: April 1930 flatbed U-bolt needed.
Neil, I have the brackets you show in the picture of. Then I have 3 U-bolts about 12 inches, two with frame spreaders, thirs without. I have one U-bolt that is about 6-7 inches and has a small 1.5-2 inch frame spacer. The other long bolts with plates may have come from my helper springs that were on the truck. If anyone is looking for helpers I have a set. I am only missing the one U-bolt and frame spacer that goes in the very rear of the frame. I do have one extra middle frame U-bolt but not the spacer. I will post some pics when I get them back from the stripper. Thanks