I have what I believe is a long wheel base spare tire carrier that i would trade for a 30/31 swb carrier.
it has been sand blasted and primed, it measures 36" and includes the jamb nut and bolt and stops.
AA 30/31 long wheel base tire carrier
- AAholic
- Posts: 278
- Joined: October 27th, 2010, 7:24 pm
- Body Type: 82-B
- Model Year: 1931
- Location: N.E.Illinois
AA 30/31 long wheel base tire carrier
- Attachments
-
- carrier-hinge.jpg (71.59 KiB) Viewed 3587 times
Last edited by AAholic on January 9th, 2011, 8:28 am, edited 1 time in total.
-
- Posts: 474
- Joined: September 24th, 2009, 3:06 pm
- Body Type: Express
- Model Year: 1928
- Location: NE Illinois
Re: AA 30/31 long wheel base tire carrier
It would be nice to know the price & where it is located.
- AAholic
- Posts: 278
- Joined: October 27th, 2010, 7:24 pm
- Body Type: 82-B
- Model Year: 1931
- Location: N.E.Illinois
Re: AA 30/31 long wheel base tire carrier
This item is located in northern Illinois (60430), as i would prefer to trade this i have not listed a price as yet.
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: AA 30/31 long wheel base tire carrier
FYI - The AA-1483 and 84 wheel stops are for a 1930 AA157. The wheel carrier is for a 1931 AA157. OR it might be for a '32 BB. I would need closer pictures of one of the hinges. If you want to sell the wheel stops separate, I know someone that needs them.
If you don't have another swivel bolt (with jam nut), then you should keep the one you have. You are most likely going to find an AA131 carrier without this part.
There is currently an Ebay auction for an AA131 wheel carrier (no swivel bolt) Item number: 170587915635
If you don't have another swivel bolt (with jam nut), then you should keep the one you have. You are most likely going to find an AA131 carrier without this part.
There is currently an Ebay auction for an AA131 wheel carrier (no swivel bolt) Item number: 170587915635
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
- AAholic
- Posts: 278
- Joined: October 27th, 2010, 7:24 pm
- Body Type: 82-B
- Model Year: 1931
- Location: N.E.Illinois
Re: AA 30/31 long wheel base tire carrier
Neil, Thanks for the great info, I've added a close up of one of the hinges, if i can't work out an even trade then I'll separate the stops for you and hang on to the swivel bolt and nut.
- gunmetal
- Posts: 304
- Joined: August 21st, 2010, 7:28 am
- Body Type: 188-A
- Model Year: 1929
- Location: Milford, Indiana
Re: AA 30/31 long wheel base tire carrier
I would buy the swival bolt and nut and bracket from you. That is all I need to have a complete one. E-mail me at terry_rose2002@yahoo.com Please...................
Thank You have a nice new year.
Thank You have a nice new year.
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: AA 30/31 long wheel base tire carrier
Hello AAholic,
It looks like the wheel carrier you have is for the BB given the hinge design. The 1931 AA157 carrier would have straight hinges. A torch and hammer would straighten out the hinges and make it ready for the AA157.
It looks like the wheel carrier you have is for the BB given the hinge design. The 1931 AA157 carrier would have straight hinges. A torch and hammer would straighten out the hinges and make it ready for the AA157.
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
- AAholic
- Posts: 278
- Joined: October 27th, 2010, 7:24 pm
- Body Type: 82-B
- Model Year: 1931
- Location: N.E.Illinois
Re: AA 30/31 long wheel base tire carrier
good to know Neil, thanks again for your input