1929 front u-joint needed

1crosscut · Post by **1crosscut** » July 4th, 2011, 7:25 pm

Seems my front u-joint for my 29 AA has turned the drive shaft for the last time. If anyone has an extra they would be willing to part with I would appreciate it.
Dave

: DSC06995.JPG (112.3 KiB) Viewed 4272 times

gunmetal · Post by **gunmetal** » July 4th, 2011, 10:21 pm

Is everthing else ok sorry I don't have any u-joints.

Neil Wilson · Post by **Neil Wilson** » July 5th, 2011, 7:12 am

Dave,
The front u-joint for an AA with the three speed transmission attaches to the transmission. And, that u-joint is the same as used in the A. So, that should make it easy to find one.

1crosscut · Post by **1crosscut** » July 5th, 2011, 6:07 pm

Neil - good news that it is the same as the Model A. I see that Bert's has one in their catalog. Has anyone used the reproduction u joints and if so what are your thoughts on them? Or would it be best to try to find a good used one?

Gunmetal - suprisingly everything else in that area seems to have escaped much if any damage.
Dave

Reds34 · Post by **Reds34** » July 5th, 2011, 7:05 pm

From what I've heard, the reproductions aren't that good, and that it's better to find a good original. No experience though. Just my $0.02.

Red

miner art · Post by **miner art** » July 11th, 2011, 8:11 am

Reds34 wrote:From what I've heard, the reproductions aren't that good, and that it's better to find a good original. No experience though. Just my $0.02.

Red

So then the rear U is not the same as the 'A. one of mine has an issue!!
Art

truknut · Post by **truknut** » July 11th, 2011, 5:18 pm

1crosscut,
If a stock A U Joint will fit, I have one that appears to be NOS. If interested, I will send pics via e-mail. It is for a car, and is much smaller than the one I needed for my AA with the hi-lo set-up.

Truknut

miner art · Post by **miner art** » July 11th, 2011, 6:04 pm

truknut wrote:1crosscut,
If a stock A U Joint will fit, I have one that appears to be NOS. If interested, I will send pics via e-mail. It is for a car, and is much smaller than the one I needed for my AA with the hi-lo set-up.

Truknut

Hey 'T" I think the front is a. I also have the 'AA 'LO-HIGH. was your fit front or back?
ART

1crosscut · Post by **1crosscut** » July 11th, 2011, 7:32 pm

truknut wrote:1crosscut,
If a stock A U Joint will fit, I have one that appears to be NOS. If interested, I will send pics via e-mail. It is for a car, and is much smaller than the one I needed for my AA with the hi-lo set-up.

Truknut

Truknut,
I just got one comming my way this morning. Looks to be a NOS or very slightly used. If for some reason it doesn't pan out I'll give you a shout. Thanks, Dave

aa-fords.com

1929 front u-joint needed

1929 front u-joint needed

Re: 1929 front u-joint needed

Re: 1929 front u-joint needed

Re: 1929 front u-joint needed

Re: 1929 front u-joint needed

Re: 1929 front u-joint needed

Re: 1929 front u-joint needed

Re: 1929 front u-joint needed

Re: 1929 front u-joint needed