Hi -
I need the following coupling shaft parts for a 1930 AA truck.
AA- 4811 Coupling shaft male gear
AA- 7095 Coupling shaft male gear retainer
AA- 4826 Coupling shaft male gear screw
A-22245 3/8 (.401-.411 3/32 x 21/32) male gear lock washer
AA- 4822 Coupling shaft thrust spring
AA- 7090-B Universal joint assembly – with collar – with bevel gear axle
My zip code is 05048 - Hartland, VT. My e-mail is vdizerega@hotmail.com
Thank you.
Wanted: Coupling Shaft Parts
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Vicky,
I have a '30/'31 SWB coupling shaft to sell. Send me an e-mail and I will take pictures of it for you.
I have a '30/'31 SWB coupling shaft to sell. Send me an e-mail and I will take pictures of it for you.
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
- Mike in Maine
- Posts: 188
- Joined: November 17th, 2004, 1:54 pm
- Body Type: 82B
- Model Year: 1931
- Location: Alfred, Maine
coupler shaft
Vicky,
Below is the best of what I have. The screw is one I had made. The spring is not original. All else is original and has some wear. Let me know if you may be interested in all or some of it. Neil may have some with more meat on the teeth. e-mail: mbtowne@adelphia.net
Mike
Below is the best of what I have. The screw is one I had made. The spring is not original. All else is original and has some wear. Let me know if you may be interested in all or some of it. Neil may have some with more meat on the teeth. e-mail: mbtowne@adelphia.net
Mike
- Attachments
-
- IMG_7356.jpg (47.28 KiB) Viewed 5011 times
-
- 7359.jpg (51.01 KiB) Viewed 5014 times
-
- AA-6311.jpg (42.94 KiB) Viewed 5014 times
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Mike,
Do you have any specifications for the spring you have. I put my truck back together with an original spring but did not take information off of it.
Do you have any specifications for the spring you have. I put my truck back together with an original spring but did not take information off of it.
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
- Mike in Maine
- Posts: 188
- Joined: November 17th, 2004, 1:54 pm
- Body Type: 82B
- Model Year: 1931
- Location: Alfred, Maine
coupler spring
Neil,
I have it written down the measurements. Now all I have to do is find it.
The specs I have are from an original spring. I'll send it out as soon as I find it.
Mike
I have it written down the measurements. Now all I have to do is find it.
The specs I have are from an original spring. I'll send it out as soon as I find it.
Mike
- Mike in Maine
- Posts: 188
- Joined: November 17th, 2004, 1:54 pm
- Body Type: 82B
- Model Year: 1931
- Location: Alfred, Maine
coupler spring
Neil,
The measurements I found are the following.
Lentgh - 1.5 inches
Wire - .090 inches (13 gauge?)
O.D. - .920 inches
I.D. - .740 inches
# coils - 6
I can only assume that the measurements are from origanal springs. I had measuremnts of two springs. One was from my truck which had a slight bend. The other was from a shaft I found with the spring still stuck
in the hole and in very good shape.
The spring I have pictured in the earlier post is not original but the only one I can find that is close to the above measurements.
Regards,Mike
The measurements I found are the following.
Lentgh - 1.5 inches
Wire - .090 inches (13 gauge?)
O.D. - .920 inches
I.D. - .740 inches
# coils - 6
I can only assume that the measurements are from origanal springs. I had measuremnts of two springs. One was from my truck which had a slight bend. The other was from a shaft I found with the spring still stuck
in the hole and in very good shape.
The spring I have pictured in the earlier post is not original but the only one I can find that is close to the above measurements.
Regards,Mike
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Thanks Mike,
I appreciate the information.
I appreciate the information.
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/