Looking for a Warford?

[Chris Haynes]

http://houston.craigslist.org/pts/4556538243.html

[Ulysses6]

for three speed, or four ?

http://houston.craigslist.org/pts/4556538243.html

[Chris Haynes]

Warfords are three speed. Underdrive, Direct, and Overdrive.

[spdway1]

Chris re-read his question....

[Chris Haynes]

Chris re-read his question....

It doesn't make any difference. They are different but one for a 3 speed will work with a 4 speed with the right combination of parts.

[Ulysses6]

so the one listed was originally built for the 28/29 three speed ? my early 29 has been modified with 30/31 four speed, front and rear axles.

Chris re-read his question....

It doesn't make any difference. They are different but one for a 3 speed will work with a 4 speed with the right combination of parts.

[Bob C]

Are you sure you don't have an early 1930, they used the same
sheet metal as the 28-29 till mid 30. Does the cross member over
the rear axle have a hump in it or is it flat.

Bob

[Ulysses6]

yes, january 29 firewall stamp and february 29 frame stamp.

Are you sure you don't have an early 1930, they used the same
sheet metal as the 28-29 till mid 30. Does the cross member over
the rear axle have a hump in it or is it flat.

Bob

[spdway1]

I would say it does make a difference on what parts the one for sale has to what application one would want to use it for.

[spectria]

I would say it does make a difference on what parts the one for sale has to what application one would want to use it for.

Yes

[Chris Haynes]

I am putting a '28/'29 Warford in my Early '30.

[bud valerius]

I have two late 1930 AA's & one late 1931 AA with the 1929 Warfords installed also have a late 1931 long wheel base with the correct Warford for he long wheel base

[Neil Wilson]

The Warford in the ad is a '28/'29 unit. Since the ad on Craigslist indicates it is an "A" overdrive, then it may have "A" front and rear u-joints (but this is not specified). To install a '28/'29 Warford (as shown in the ad) behind an AA with a three speed requires the "A" front and "AA" rear u-joints. To install this Warford behind a four-speed requires adapter parts (including the three parts shown below the Warford + a special u-joint for the 4-speed).

[AAholic]

Neil, You wouldn't happen to have one of these special u joints to fit the four speed would you? or a part number or maybe photo?

[Neil Wilson]

AAholic,
Sorry, I don't know the special u-joint part number and I don't have one to sell.