Wire spoke wheels and drive shaft coupler.

Here you can put your AA parts for sale, and wanted posts.
Post Reply
User avatar
1crosscut
Posts: 816
Joined: December 25th, 2010, 7:22 pm
Body Type: 82-A
Model Year: 1929
Location: Lincoln, NE

Wire spoke wheels and drive shaft coupler.

Post by 1crosscut » February 16th, 2015, 3:42 pm

I have three 1928 wire spoke wheels. one 1929 wheel and a coupling shaft for behind a four speed transmission for sale. Wheels are serviceable. One of the wire spoke wheels has a small hole in the center of the wide part of the rim that is about 3/16" in diameter. Can be welded shut. On the exterior of the wheels there is some surface rust and light pitting. On the wheel that is by itself in the 2nd picture I didn't knock the lock ring loose and the lock ring on it is bad but I believe the wheel itself is fine. All four wheels do have the standard flaky rusty crud that is standard on the areas covered by the tube and tires. The u-joint on the shaft looks to be in very good conditon but the tube cover is kaput. First person with $150.00 takes them all.
Attachments
IMG_1837.JPG
IMG_1837.JPG (130.99 KiB) Viewed 1258 times
IMG_1839.JPG
IMG_1839.JPG (135.73 KiB) Viewed 1258 times
------------
Dave

User avatar
spectria
Posts: 1874
Joined: May 15th, 2008, 9:53 pm
Body Type: Mail Truck, Stakebed
Model Year: 1931
Location: Quincy, Ca.

Re: Wire spoke wheels and drive shaft coupler.

Post by spectria » February 16th, 2015, 8:37 pm

1crosscut wrote:I have three 1928 wire spoke wheels. one 1929 wheel and a coupling shaft for behind a four speed transmission for sale. Wheels are serviceable. One of the wire spoke wheels has a small hole in the center of the wide part of the rim that is about 3/16" in diameter. Can be welded shut. On the exterior of the wheels there is some surface rust and light pitting. On the wheel that is by itself in the 2nd picture I didn't knock the lock ring loose and the lock ring on it is bad but I believe the wheel itself is fine. All four wheels do have the standard flaky rusty crud that is standard on the areas covered by the tube and tires. The u-joint on the shaft looks to be in very good condition but the tube cover is kaput. First person with $150.00 takes them all.
Would you sell the shaft alone?
Dave in Quincy, Ca. I love Pics!!!! Post them All!!! :)
Join the Ford Model AA Truck Club - membership form at http://www.fmaatc.org

Stakebed
Posts: 1187
Joined: June 14th, 2007, 7:29 pm
Body Type: Grainbox
Model Year: 1929
Location: Illinois

Re: Wire spoke wheels and drive shaft coupler.

Post by Stakebed » February 16th, 2015, 11:02 pm

email sent

User avatar
1crosscut
Posts: 816
Joined: December 25th, 2010, 7:22 pm
Body Type: 82-A
Model Year: 1929
Location: Lincoln, NE

Re: Wire spoke wheels and drive shaft coupler.

Post by 1crosscut » February 20th, 2015, 6:56 pm

Drive shaft and 29 wheel are sold. The three 28 spoke wheels are still available. Make an offer if interested.
------------
Dave

User avatar
1crosscut
Posts: 816
Joined: December 25th, 2010, 7:22 pm
Body Type: 82-A
Model Year: 1929
Location: Lincoln, NE

Re: Wire spoke wheels and drive shaft coupler.

Post by 1crosscut » February 22nd, 2015, 6:46 pm

Sold pending payment.
------------
Dave

Post Reply