Parting out AA Project

Here you can put your AA parts for sale, and wanted posts.
Post Reply
John - NNY
Posts: 119
Joined: October 1st, 2007, 6:38 pm
Model Year: 1930

Parting out AA Project

Post by John - NNY » June 20th, 2015, 2:10 pm

Listing a bunch of A/AA Parts for sale. Most all parts are new or rebuilt. I'm not going to be able to finish my AA restoration project. So, I am parting with what I have collected for my project. I will be listing more as I go through things. Buyer pays shipping.

AA brake shoes, NOS, 'Wards' brand
- full set for all four wheels, woven and bonded lining, riveted to steel shoes $350

AA Lug Nuts, Cad Plated, 30-31
(5) L Rear inner
(5) L Rear outer
(5) R Rear inner
(5) R Rear outer
(6) R Front
$75.00

AA Brake Rivet Tool, new $20

AA Rear E. Brake lining, new (missing rivets, I know there somewhere?) AA-2620 $55

AA PTO, six-hole mount $60 - PENDING

A/AA Distributor, Rebuilt, new bushings, shaft. Rotor bolt/shaft drilled for easy lube.
w/ electronic ignition
w/12v coil, body & cap, coil wire, spark plug connectors, dist. drive rod (lower), ign. pop out cable
$300.00

A/AA Air Maze Air Filter A-9600-ACC
New ('U' shape) $27

AA Front Steering Arms, New ball ends welded on. Price per set of three arms. Two sets available.
- Pitman Arm A-3590
- Single Steering Arm AA-3130
- Double Steering Arm AA-3131
$150 set

A/AA Generator, professionally rebuilt, w/brush band, 12 volt, short nose $175

A/AA Starter, professionally rebuilt, 12 volt
w/ Bendix, modern (new), Starter Switch (new), Starter rod, (new) A11470, Safety Fuse kit A-11450-SF, gasket, bolts, (new), Starter rod grommet, cover, bolts, (new)
$240

(2) A/AA Horn Restorers, 12v to 6v, new $16.00 ea

A/AA Gas Cap, New repo
$16.00

A/AA Patent Data Plate, new repo $1.00

A/AA Amp Gauge, A10850/20
- 20 amp, no script, new repo
$6.50

Light Switch wire bail, Cad plated $1.00

AA Wood Floor Boards, new,
$70.00

A/AA Speedometer, Stewart Warner
- rebuilt, round $180

A/AA Cam Nut Tool, used
$13.00

A/AA Engine Lift Tools (1 pr)
$17.00 pr

Rear Engine Mount Rubber Pads, new repo w/ hardware
$13.50

Ford speedo cable, NOS,
113.8" long (inner cable only)
1930, 1939 (157" WB Trk)(134" WB COE)
$20

Ammco Brake Drum Micrometer
No 8500 6-16" range - SOLD

I also have a restored frame (30-31 dump truck), restored rear springs, restored front end, restored high speed rear axle, brake parts, plus a bunch of other restored bits and pieces. Not quite a rolling chassis. I will also be listing several unrestored wheels (30-31). Tires are still mounted. Plus a 30-31 Cab (some rust along the bottom, solid floor, no seat, both doors are great). I plan to be at the Syracuse Car Show July 17, 18 and/or 19th. Arrangements can be made to pick things up there. Delivery of the big items (frame, axles, cab, etc) might be arranged if purchased together.

Located in Northern NY 13637
John
Last edited by John - NNY on June 30th, 2015, 4:41 am, edited 1 time in total.

Sandman
Posts: 113
Joined: March 5th, 2010, 12:09 pm
Body Type: aa
Model Year: 1928

Re: Parting out AA Project

Post by Sandman » June 29th, 2015, 5:33 am

I am interested in the cab and wheels . Can you email me some photos. Where are you located? Also put the prices on. I am in Ontario. Email me at hlangen@zing-net.ca

Randy
Posts: 10
Joined: April 15th, 2014, 6:24 pm
Body Type: AA 1 1/2 ton
Model Year: 1928

Re: Parting out AA Project

Post by Randy » July 1st, 2015, 8:47 am

IMG_0249.JPG
IMG_0249.JPG (360.87 KiB) Viewed 4306 times
Would you have the universal joint housing that bolts on the transmission. It's a 6 hole bolt pattern that bolts on to the split housing on the end of the driveshaft. I believe that is an eight hole. I would like to see a picture if possible.
Thanks
Randy

Jared275
Posts: 306
Joined: May 29th, 2009, 8:37 pm
Body Type: dUMP
Model Year: 1928

Re: Parting out AA Project

Post by Jared275 » July 1st, 2015, 9:55 pm

I think I have one in the garage. I'm in Asia for the next couple weeks and can check when I get back. If I do locate it you can have it for just the price of shipping.

Bret
Posts: 2
Joined: August 26th, 2015, 1:17 pm
Body Type: AA stake bed
Model Year: 1930

Re: Parting out AA Project

Post by Bret » August 27th, 2015, 1:12 pm

Do you still have the high speed rear end?
Thanks Bret

John - NNY
Posts: 119
Joined: October 1st, 2007, 6:38 pm
Model Year: 1930

Re: Parting out AA Project

Post by John - NNY » August 27th, 2015, 2:17 pm

Just sold everything.

Bret
Posts: 2
Joined: August 26th, 2015, 1:17 pm
Body Type: AA stake bed
Model Year: 1930

Re: Parting out AA Project

Post by Bret » August 27th, 2015, 2:23 pm

Ok thank you.

Sandman
Posts: 113
Joined: March 5th, 2010, 12:09 pm
Body Type: aa
Model Year: 1928

Re: Parting out AA Project

Post by Sandman » September 21st, 2015, 10:07 am

Bret,
I bought all the stuff from John. I have the high speed rear end. I ewill be going to Hershey in the fall. If you need anything contact me at hlangen@zing-net.ca

Post Reply