Wanted, metal floor plate that seals steering and pedals

Here you can put your AA parts for sale, and wanted posts.
Post Reply
cokefirst
Posts: 53
Joined: May 16th, 2013, 10:13 am
Body Type: stake
Model Year: 1931
Location: San Bernardino

Wanted, metal floor plate that seals steering and pedals

Post by cokefirst »

I am looking for the two piece metal plate that is used with a felt seal to seal the brake and clutch pedals and steering column on the floorboard. The ones for the passenger car and light trucks are not large enough. I am located in San Bernardino 909-882-2240 or 909-633-8778
User avatar
Neil Wilson
Posts: 3062
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Re: Wanted, metal floor plate that seals steering and pedals

Post by Neil Wilson »

The AA used the same steering column/pedal plate and felt as the A used. What is it about the plate which is too small?
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
flatford39
Posts: 474
Joined: September 24th, 2009, 3:06 pm
Body Type: Express
Model Year: 1928
Location: NE Illinois

Re: Wanted, metal floor plate that seals steering and pedals

Post by flatford39 »

Like Neil said....that plate you are describing is the same for the car and the AA. The cabs,fenders,etc.were all interchangeable with the passenger series car / pickup.
Post Reply