WTB split ring for 30-31 budd wheels

Here you can put your AA parts for sale, and wanted posts.
Post Reply
holdover
Posts: 16
Joined: September 26th, 2016, 7:06 am
Body Type: AA
Model Year: 1930

WTB split ring for 30-31 budd wheels

Post by holdover »

Need a couple of split rings for 30-31 Budd wheels. Need to be intact and not sprung Thanks email me directly @ tmorisco@swva.net



thanks

tony
Stakebed
Posts: 1223
Joined: June 14th, 2007, 7:29 pm
Body Type: Grainbox
Model Year: 1929
Location: Illinois

Re: WTB split ring for 30-31 budd wheels

Post by Stakebed »

if their not super sprung or kinked they can be bent back to be useful again. good luck finding a non sprung one. May have been possible back when these trucks were used daily but give it 60+ years of rust good luck...
holdover
Posts: 16
Joined: September 26th, 2016, 7:06 am
Body Type: AA
Model Year: 1930

Re: WTB split ring for 30-31 budd wheels

Post by holdover »

I know it is wishful thinking about an unsprung ring, at this point a slightly sprung one would be acceptable
30TownSedan
Posts: 64
Joined: January 10th, 2010, 7:46 am
Model Year: 1930

Re: WTB split ring for 30-31 budd wheels

Post by 30TownSedan »

Tony, where are you located?
holdover
Posts: 16
Joined: September 26th, 2016, 7:06 am
Body Type: AA
Model Year: 1930

Re: WTB split ring for 30-31 budd wheels

Post by holdover »

30 townsedan

sent you an email, located in Copper Hill VA tmorisco@swva.net
30TownSedan
Posts: 64
Joined: January 10th, 2010, 7:46 am
Model Year: 1930

Re: WTB split ring for 30-31 budd wheels

Post by 30TownSedan »

Received email. Might have had something to help you out, but VA is too far away.
Post Reply