Page 1 of 1

28 AA EXPRESS BED REDUCED TO 1500

Posted: December 3rd, 2017, 7:56 am
by birdacre
Post November 15th, 2017, 3:34 pm
not sure if 1500 would attract any attention. i know the spare holder can go for 4 or 500. good tailgate 300, sides are good start, headboard a start, and one rear fender bracket, hard to come by. any interest at 1500? my bed came out beautiful with new sides butt welded from the horizontal groove down. SEE PHOTOS IN PREVIOUS THREAD. THANK YOU.

Re: 28 AA EXPRESS BED REDUCED TO 1500

Posted: December 3rd, 2017, 10:06 am
by Chris Haynes
Where can I get the new sides?

Re: 28 AA EXPRESS BED REDUCED TO 1500

Posted: December 3rd, 2017, 11:25 am
by birdacre
Re: 28 express bed for sale

Post Mon Oct 30, 2017 2:04 pm
I had a local sheet metal company roll the side radius and then bend the lower section to fit the wood support. They were able to bend at the correct angle to make it fit correct on the frame. I got the drawing from the aa truck web site. I used 14 gauge mild steel. They are limited to 8’ lengths as there roller is only 8’. They are located in kalamazoo Michigan. Allied Mechanical Sheetmetal- Larry Decker. Cost was 250.00 for pair three years ago.

Re: 28 AA EXPRESS BED REDUCED TO 1500

Posted: December 3rd, 2017, 11:26 am
by birdacre
this comment came to my post that included the photos before i lowered the price. hope it helps. kevin

Re: 28 AA EXPRESS BED REDUCED TO 1500

Posted: January 28th, 2018, 5:05 pm
by birdacre
maybe 1200 and someone will be interested. just want to see this used by someone. thank you, kevin

Re: 28 AA EXPRESS BED REDUCED TO 1500

Posted: February 3rd, 2018, 4:44 pm
by 1wonton
If you really "want to see this used by someone" why not either give it away or ask $2-300?

Re: 28 AA EXPRESS BED REDUCED TO 1500

Posted: February 4th, 2018, 8:29 am
by birdacre
i guess because i could use the money to finish my AA. anyways hope all is well.