Page 1 of 1
"29 hood
Posted: February 7th, 2018, 4:40 pm
by 1wonton
Looking for usable '28-29 Ford hood, near SF bay area. Hood should open and close ok and surface rust. Not looking for painted/restored hood.
ron
Re: "29 hood
Posted: February 7th, 2018, 8:54 pm
by Stakebed
I have the perfect one but unfortunately Im in IL
Re: "29 hood
Posted: February 8th, 2018, 6:02 am
by 1wonton
Thanks Stakebed, that's a big help.........................
Re: "29 hood
Posted: February 18th, 2018, 5:48 pm
by locke9999
have a new hood in stockton CA
Re: "29 hood
Posted: February 19th, 2018, 7:35 am
by 1wonton
Thank you but I'm looking for a rusty hood to match the rest of the truck.
Re: "29 hood
Posted: February 19th, 2018, 5:49 pm
by 1crosscut
Stakebed wrote: ↑February 7th, 2018, 8:54 pm
I have the perfect one but unfortunately Im in IL
I wouldn't think it would be bank busting to box up a hood and ship it. If you pull the panels apart it should go into a relatively small box.
Re: "29 hood
Posted: February 20th, 2018, 6:01 am
by Stakebed
1crosscut wrote: ↑February 19th, 2018, 5:49 pm
Stakebed wrote: ↑February 7th, 2018, 8:54 pm
I have the perfect one but unfortunately Im in IL
I wouldn't think it would be bank busting to box up a hood and ship it. If you pull the panels apart it should go into a relatively small box.
Oh its already apart and hinges straightened just keeping the wasps company in the shed
Faded rock moss green paint and surface rust. Pretty straight hood from Iowa. Some reason the louvers at the very ends are rusted thin but be perfect for this type of project.
Re: "29 hood
Posted: February 21st, 2018, 1:01 pm
by Stakebed
20180220_170328_HDR by
Bob Bobbington, on Flickr
20180220_170334_HDR by
Bob Bobbington, on Flickr
20180220_170405_HDR by
Bob Bobbington, on Flickr
20180220_170409_HDR by
Bob Bobbington, on Flickr
Forgot i had to mediablast the hinge area and we fixed one of the hinges. The brown on the hood top is some kinda primer it looks like, side panel brown is rust. Easy enough to media blast the rest of the hood tops and let it rust again. I dont have any rods but people have used wood dowel rods and FYI the center hinge rod is the same diameter and material as a horn rod.
Re: "29 hood
Posted: February 24th, 2018, 6:58 am
by 1wonton
Found a hood, thanks everyone.