Wanted - Universal Joint

Here you can put your AA parts for sale, and wanted posts.
Post Reply
Jeff Brown
Posts: 47
Joined: May 26th, 2016, 9:57 am
Body Type: 82-A
Model Year: 1929

Wanted - Universal Joint

Post by Jeff Brown » February 13th, 2018, 6:54 pm

Hi,
I need a universal joint to connect a Warford auxiliary transmission to my driveshaft. Thought I had one but have only got two halves and one is riveted so cannot join them. Sizes of the splines that I need are as follows:

Short End (Warford) 6 splines 1.175" and 1.055" internal diameter. Bearing size on riveted type is 0.980" diameter
Long end (driveshaft) 10 splines 1.25" and 1.085" internal diameter. Bearing bush outer diameter is 0.971"

The way I see it, I could use any of the following:
1. Complete universal with both correct spines
2. Riveted universal with correct spline for driveshaft and bearing size so I could rivet the two halves to make up the right combination
3. Newer style with correct Warford spline and bearing bush size that I could mate with my driveshaft end.

Any help appreciated!

Thanks

Jeff
Attachments
20180209_185255e.jpg
20180209_185255e.jpg (443.46 KiB) Viewed 336 times
20180213_190715e.jpg
20180213_190715e.jpg (440 KiB) Viewed 336 times

bud valerius
Posts: 307
Joined: May 14th, 2004, 5:24 am
Model Year: 1930
Location: Manhattan , Kansas

Re: Wanted - Universal Joint

Post by bud valerius » February 14th, 2018, 5:17 am

I have what you need in both styles (economyelectric@hotmail.com) cell # 785-556 1763 Manhattan Kansas

Jeff Brown
Posts: 47
Joined: May 26th, 2016, 9:57 am
Body Type: 82-A
Model Year: 1929

Re: Wanted - Universal Joint

Post by Jeff Brown » February 15th, 2018, 5:18 am

PM sent.

bud valerius
Posts: 307
Joined: May 14th, 2004, 5:24 am
Model Year: 1930
Location: Manhattan , Kansas

Re: Wanted - Universal Joint

Post by bud valerius » February 19th, 2018, 5:48 am

I got the pay pal payment but I didn't get your e mail with shipping address

Post Reply