Hi,
I need a universal joint to connect a Warford auxiliary transmission to my driveshaft. Thought I had one but have only got two halves and one is riveted so cannot join them. Sizes of the splines that I need are as follows:
Short End (Warford) 6 splines 1.175" and 1.055" internal diameter. Bearing size on riveted type is 0.980" diameter
Long end (driveshaft) 10 splines 1.25" and 1.085" internal diameter. Bearing bush outer diameter is 0.971"
The way I see it, I could use any of the following:
1. Complete universal with both correct spines
2. Riveted universal with correct spline for driveshaft and bearing size so I could rivet the two halves to make up the right combination
3. Newer style with correct Warford spline and bearing bush size that I could mate with my driveshaft end.
Any help appreciated!
Thanks
Jeff
Wanted - Universal Joint
-
- Posts: 123
- Joined: May 26th, 2016, 9:57 am
- Body Type: 82-A
- Model Year: 1929
- Location: Tucson AZ
Wanted - Universal Joint
- Attachments
-
- 20180209_185255e.jpg (443.46 KiB) Viewed 3773 times
-
- 20180213_190715e.jpg (440 KiB) Viewed 3773 times
-
- Posts: 386
- Joined: May 14th, 2004, 5:24 am
- Model Year: 1930
- Location: Manhattan , Kansas
Re: Wanted - Universal Joint
I have what you need in both styles (economyelectric@hotmail.com) cell # 785-556 1763 Manhattan Kansas
-
- Posts: 123
- Joined: May 26th, 2016, 9:57 am
- Body Type: 82-A
- Model Year: 1929
- Location: Tucson AZ
Re: Wanted - Universal Joint
PM sent.
-
- Posts: 386
- Joined: May 14th, 2004, 5:24 am
- Model Year: 1930
- Location: Manhattan , Kansas
Re: Wanted - Universal Joint
I got the pay pal payment but I didn't get your e mail with shipping address