WTB rear spring top bushing holder

Here you can put your AA parts for sale, and wanted posts.
Post Reply
User avatar
s147881
Posts: 379
Joined: April 13th, 2007, 8:09 pm
Body Type: stake bed 82A
Model Year: 1930
Location: Decatur Michigan

WTB rear spring top bushing holder

Post by s147881 » January 13th, 2019, 8:31 am

I need a set of unworn 30-31 rear spring top bracket that holds the big bushings. My are worn on the bottom. Thanks in advance

bobmay1
Posts: 41
Joined: October 26th, 2017, 4:16 am
Model Year: 1930

Re: WTB rear spring top bushing holder

Post by bobmay1 » January 13th, 2019, 8:33 am

ImageImage
See bottom - gap between bushing and spring


Sent from my iPhone using Tapatalk

User avatar
s147881
Posts: 379
Joined: April 13th, 2007, 8:09 pm
Body Type: stake bed 82A
Model Year: 1930
Location: Decatur Michigan

Re: WTB rear spring top bushing holder

Post by s147881 » January 13th, 2019, 4:34 pm

I welded them up and machined them - turned out good. No longer need any.

Hayslip
Posts: 204
Joined: February 26th, 2007, 6:20 am
Model Year: 1930

Re: WTB rear spring top bushing holder

Post by Hayslip » January 16th, 2019, 9:29 am

When putting this back together don't forget this has to rotate. I've seen examples so tight no movement can occur. No wonder the ride is hard. I've heard arguments that this isn't suppose to rotate; my answer is why the grease fitting. One should be able to rotate the outside flat washer by hand.
Hayslip

User avatar
s147881
Posts: 379
Joined: April 13th, 2007, 8:09 pm
Body Type: stake bed 82A
Model Year: 1930
Location: Decatur Michigan

Re: WTB rear spring top bushing holder

Post by s147881 » January 17th, 2019, 2:50 pm

Put back on - nice tight fit with good rotation

gearling
Posts: 60
Joined: October 30th, 2015, 6:59 am
Body Type: AA
Model Year: 1929

Re: WTB rear spring top bushing holder

Post by gearling » January 18th, 2019, 9:12 am

Bravo!

Post Reply