WTB rear spring top bushing holder
- s147881
- Posts: 425
- Joined: April 13th, 2007, 8:09 pm
- Body Type: stake bed 82A
- Model Year: 1930
- Location: Decatur Michigan
WTB rear spring top bushing holder
I need a set of unworn 30-31 rear spring top bracket that holds the big bushings. My are worn on the bottom. Thanks in advance
Re: WTB rear spring top bushing holder
See bottom - gap between bushing and spring
Sent from my iPhone using Tapatalk
- s147881
- Posts: 425
- Joined: April 13th, 2007, 8:09 pm
- Body Type: stake bed 82A
- Model Year: 1930
- Location: Decatur Michigan
Re: WTB rear spring top bushing holder
I welded them up and machined them - turned out good. No longer need any.
Re: WTB rear spring top bushing holder
When putting this back together don't forget this has to rotate. I've seen examples so tight no movement can occur. No wonder the ride is hard. I've heard arguments that this isn't suppose to rotate; my answer is why the grease fitting. One should be able to rotate the outside flat washer by hand.
Hayslip
- s147881
- Posts: 425
- Joined: April 13th, 2007, 8:09 pm
- Body Type: stake bed 82A
- Model Year: 1930
- Location: Decatur Michigan
Re: WTB rear spring top bushing holder
Put back on - nice tight fit with good rotation