Sold 3/15/20
1930 AA 157” wheel base chassis with six wheels. Location is in La Verne, California. This is rolling chassis with a front and rear end plus a coupling shaft. The rear of the frame is original (not cut off). It has six 1930 AA wheels with split lock rings.
Sold 3/15/20 - 1930 AA 157” Chassis with Wheels
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Sold 3/15/20 - 1930 AA 157” Chassis with Wheels
- Attachments
-
- 20191229_143642-q8.jpg (66.77 KiB) Viewed 6525 times
Last edited by Neil Wilson on March 15th, 2020, 9:37 am, edited 1 time in total.
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: 1930 AA 157” Chassis with Wheels
xxx
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: 1930 AA 157” Chassis with Wheels
xxxx
Last edited by Neil Wilson on February 25th, 2020, 5:58 pm, edited 1 time in total.
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
- Chris Haynes
- Posts: 2203
- Joined: September 7th, 2003, 5:18 pm
- Body Type: 82A
- Model Year: 1930
- Location: Camarillo, CA
Re: 1930 AA 157” Chassis with Wheels
I have never seen a front cross member like that on a '30/'31.
-
- Posts: 1442
- Joined: April 24th, 2003, 11:50 am
- Body Type: Mail truck, Stake tr
- Model Year: 1931
- Location: SO CAL
Re: 1930 AA 157” Chassis with Wheels
That was used on the 157" tapered frame AA.Chris Haynes wrote: ↑February 17th, 2020, 5:50 pmI have never seen a front cross member like that on a '30/'31.
Bob
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: 1930 AA 157” Chassis with Wheels
FYI - The solid engine mount front cross member was used on the 1930 AA157 tapered frame and the AA112 drop floor frame.Bob C wrote: ↑February 18th, 2020, 8:31 amThat was used on the 157" tapered frame AA. BobChris Haynes wrote: ↑February 17th, 2020, 5:50 pmI have never seen a front cross member like that on a '30/'31.
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: 1930 AA 157” Chassis with Wheels
xxx
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/