Page 1 of 1
Sold 3/15/20 - 1930 AA 157” Chassis with Wheels
Posted: January 22nd, 2020, 11:15 am
by Neil Wilson
Sold 3/15/20
1930 AA 157” wheel base chassis with six wheels. Location is in La Verne, California. This is rolling chassis with a front and rear end plus a coupling shaft. The rear of the frame is original (not cut off). It has six 1930 AA wheels with split lock rings.
Re: 1930 AA 157” Chassis with Wheels
Posted: February 2nd, 2020, 8:49 am
by Neil Wilson
xxx
Re: 1930 AA 157” Chassis with Wheels
Posted: February 17th, 2020, 5:24 am
by Neil Wilson
xxxx
Re: 1930 AA 157” Chassis with Wheels
Posted: February 17th, 2020, 5:50 pm
by Chris Haynes
I have never seen a front cross member like that on a '30/'31.
Re: 1930 AA 157” Chassis with Wheels
Posted: February 18th, 2020, 8:31 am
by Bob C
Chris Haynes wrote: ↑February 17th, 2020, 5:50 pm
I have never seen a front cross member like that on a '30/'31.
That was used on the 157" tapered frame AA.
Bob
Re: 1930 AA 157” Chassis with Wheels
Posted: February 20th, 2020, 6:10 pm
by Neil Wilson
Bob C wrote: ↑February 18th, 2020, 8:31 am
Chris Haynes wrote: ↑February 17th, 2020, 5:50 pm
I have never seen a front cross member like that on a '30/'31.
That was used on the 157" tapered frame AA. Bob
FYI - The solid engine mount front cross member was used on the 1930 AA157 tapered frame and the AA112 drop floor frame.
Re: 1930 AA 157” Chassis with Wheels
Posted: February 25th, 2020, 5:58 pm
by Neil Wilson
xxx