WANTED 88-A Stakes (AA-88220)

Here you can put your AA parts for sale, and wanted posts.
Post Reply
slavalley
Posts: 36
Joined: January 19th, 2020, 5:11 pm
Body Type: 88-A
Model Year: 1931

WANTED 88-A Stakes (AA-88220)

Post by slavalley » March 9th, 2020, 7:49 pm

Looking for a full set (16) of AA-88220 stakes. Bonus, if 1 of the 15 had the locking assembly (AA-88233).

User avatar
Neil Wilson
Posts: 2850
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Re: WANTED 88-A Stakes (AA-88220)

Post by Neil Wilson » March 10th, 2020, 6:04 am

slavalley wrote:
March 9th, 2020, 7:49 pm
Looking for a full set (16) of AA-88220 stakes. Bonus, if 1 of the 15 had the locking assembly (AA-88233).
slavalley, You show that your have a 187-A platform. Are you sure that you want the stakes for 188-A racks?
Regards, Neil Wilson
______________________________________
neil@aafords.com - use this email for contact
https://aafords.com/ - Ford Model AA Truck Club @ aafords.com

slavalley
Posts: 36
Joined: January 19th, 2020, 5:11 pm
Body Type: 88-A
Model Year: 1931

Re: WANTED 88-A Stakes (AA-88220)

Post by slavalley » March 10th, 2020, 8:30 pm

Yes, at the time I setup my account I wasn't sure what truck I had :)

I now know, I have a 88-A platform truck with 188-A stake racks .

Thanks for verifying. This has been a learning process.

Scott

slavalley
Posts: 36
Joined: January 19th, 2020, 5:11 pm
Body Type: 88-A
Model Year: 1931

Re: WANTED 88-A Stakes (AA-88220)

Post by slavalley » April 23rd, 2020, 7:02 pm

Anyone have measurements, or even better, a drawing so I can have some stakes made? The ones sold by Synders do not fit the 88-A :(

User avatar
Neil Wilson
Posts: 2850
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Re: WANTED 88-A Stakes (AA-88220)

Post by Neil Wilson » April 25th, 2020, 10:03 am

slavalley wrote:
April 23rd, 2020, 7:02 pm
Anyone have measurements, or even better, a drawing so I can have some stakes made? The ones sold by Synders do not fit the 88-A :(
slavalley, To have a shop make stakes from a drawing would require an engineering drawing. Refer to http://www.maffi.org/WSContent/Parts.html and enter a part# of 88220 to see the drawings available. There is also one locking stake. The parts list shown this as AA-88233.

It would be best if you could buy one original from someone and then have a shop duplicate it.

There is a drawing at https://aafords.com/open-bodies/platfor ... ipment/#ed. My drawings are for illustration and very accurate. However, they are not intended for manufacturing.
Regards, Neil Wilson
______________________________________
neil@aafords.com - use this email for contact
https://aafords.com/ - Ford Model AA Truck Club @ aafords.com

Post Reply