Wanted: AA tire valve stems

Here you can put your AA parts for sale, and wanted posts.
Post Reply
User avatar
Rumbler
Posts: 88
Joined: May 21st, 2017, 4:27 pm
Body Type: 82-A Closed Cab
Model Year: 1928
Location: Illinois

Wanted: AA tire valve stems

Post by Rumbler » April 6th, 2020, 9:06 pm

I am in need of 5 Schrader #1822 valve stems for my AA truck restoration. They are 2-1/2 inches overall length. The Schrader stems are shown in the center of the attached photo. (I could also use Dill VS-1 stems, which look very similar.)

Also the 5607 bridge washers and 725 hex nut.

Thank you for checking!
Brian
Schrader valve stem.jpg
Schrader valve stem.jpg (57.02 KiB) Viewed 1229 times

calc
Posts: 18
Joined: August 29th, 2010, 4:07 pm
Body Type: tow truck
Model Year: 1930

Re: Wanted: AA tire valve stems

Post by calc » April 23rd, 2020, 8:41 am

I came across about 10 of the nuts for the valve stems if you need any. # 4936

User avatar
Rumbler
Posts: 88
Joined: May 21st, 2017, 4:27 pm
Body Type: 82-A Closed Cab
Model Year: 1928
Location: Illinois

Re: Wanted: AA tire valve stems

Post by Rumbler » April 23rd, 2020, 8:59 am

Thank you for the reply, calc. I actually have plenty of the rim nuts and dust caps. It's the stems that have proven to be the most challenging.

Thanks again,
Brian

Post Reply