WANTED 88-A Rear Brake Light Bracket

Here you can put your AA parts for sale, and wanted posts.
Post Reply
slavalley
Posts: 35
Joined: January 19th, 2020, 5:11 pm
Body Type: 88-A
Model Year: 1931

WANTED 88-A Rear Brake Light Bracket

Post by slavalley » May 5th, 2020, 9:04 am

Hello All,

I'm in search for the rear brake light and license plate bracket.

Thx, Scott
Attachments
rear brake bracket.JPG
rear brake bracket.JPG (36.64 KiB) Viewed 856 times

User avatar
Chris Haynes
Posts: 2117
Joined: September 7th, 2003, 5:18 pm
Body Type: 82A
Model Year: 1930
Location: North Hills, CA/ Pine Grove, CA

Re: WANTED 88-A Rear Brake Light Bracket

Post by Chris Haynes » May 5th, 2020, 9:11 am


Hayslip
Posts: 218
Joined: February 26th, 2007, 6:20 am
Model Year: 1930

Re: WANTED 88-A Rear Brake Light Bracket

Post by Hayslip » May 5th, 2020, 12:43 pm

The A13406 bracket Snyders sells is for 1929 and later. The photo of the truck above shows the 1928 style tail light. This tail light and bracket are one piece, that is the licence plate bracket and the back of the tail light is one piece. Sound confusing? On the top of the tail light on the truck above is the word Duolight. In 1929 when the replaced it with the teacup shaped tail light they changed the name on the top to read Duolamp. A13406 fits the Duolamp.
Hayslip

User avatar
Neil Wilson
Posts: 2847
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Re: WANTED 88-A Rear Brake Light Bracket

Post by Neil Wilson » May 5th, 2020, 2:12 pm

slavalley wrote:
May 5th, 2020, 9:04 am
Hello All,

I'm in search for the rear brake light and license plate bracket. Thx, Scott
My guess is that you are looking for the support AA-13472. See attached - note the part id (raised).

And, yes, Chris' link looks to be that support. It likely does not have the part id.

https://www.snydersantiqueauto.com/Prod ... hByKeyword
Attachments
AA-13473 d2 Tail Lamp & License Bracket Support 6-b.jpg
AA-13473 d2 Tail Lamp & License Bracket Support 6-b.jpg (893.24 KiB) Viewed 842 times
Regards, Neil Wilson
______________________________________
neil@aafords.com - use this email for contact
https://aafords.com/ - Ford Model AA Truck Club @ aafords.com

slavalley
Posts: 35
Joined: January 19th, 2020, 5:11 pm
Body Type: 88-A
Model Year: 1931

Re: WANTED 88-A Rear Brake Light Bracket

Post by slavalley » May 6th, 2020, 8:49 am

Thanks Chris for the links, didn't think to try Synder's.

Thanks again Neil for helping guide me through my rebuild.

If anyone has an original bracket w/ the raised part number, I would be interested.

Scott

gad62
Posts: 25
Joined: March 19th, 2019, 8:44 am
Body Type: Express
Model Year: 1929
Location: Ohio

Re: WANTED 88-A Rear Brake Light Bracket

Post by gad62 » May 17th, 2020, 1:49 pm

My 29 has the same one piece tail light/ licence plate bracket as the one in the photo....but the bracket bolts flat to the bottom of the frame with 3 bolts. ....... greg

User avatar
Chris Haynes
Posts: 2117
Joined: September 7th, 2003, 5:18 pm
Body Type: 82A
Model Year: 1930
Location: North Hills, CA/ Pine Grove, CA

Re: WANTED 88-A Rear Brake Light Bracket

Post by Chris Haynes » May 17th, 2020, 2:16 pm

gad62 wrote:
May 17th, 2020, 1:49 pm
My 29 has the same one piece tail light/ licence plate bracket as the one in the photo....but the bracket bolts flat to the bottom of the frame with 3 bolts. ....... greg
My Early '30 (May 1930) has the three holes in the frame on both sides.

slavalley
Posts: 35
Joined: January 19th, 2020, 5:11 pm
Body Type: 88-A
Model Year: 1931

Re: WANTED 88-A Rear Brake Light Bracket

Post by slavalley » May 18th, 2020, 9:04 am

Can you guys post pictures?

User avatar
Neil Wilson
Posts: 2847
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Re: WANTED 88-A Rear Brake Light Bracket

Post by Neil Wilson » May 18th, 2020, 10:04 am

slavalley wrote:
May 18th, 2020, 9:04 am
Can you guys post pictures?
slavalley, I can see that the information being talked about is becoming a little off your subject. For details regarding Tail Lamp Brackets (Supports) you can refer to https://aafords.com/aa-chassis/aa-13510-electrical/. This link will provide another link to download an "AA Truck Talk - AA Lamps & Wiring" article (published April 2011). Page 3 starts the information regarding "Brackets (Supports)". I hope this helps.
Regards, Neil Wilson
______________________________________
neil@aafords.com - use this email for contact
https://aafords.com/ - Ford Model AA Truck Club @ aafords.com

slavalley
Posts: 35
Joined: January 19th, 2020, 5:11 pm
Body Type: 88-A
Model Year: 1931

Re: WANTED 88-A Rear Brake Light Bracket

Post by slavalley » May 18th, 2020, 1:48 pm

Wow Neil, you are amazing, another great write-up!

My truck is an early 30, so it appears I should be looking for part A-13470-B d3 (design 3) for use with the teacup style tail lamp, as you picture in figure 3b (also attached).

Scott
Attachments
Capture.JPG
Capture.JPG (34.79 KiB) Viewed 370 times

User avatar
Neil Wilson
Posts: 2847
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Re: WANTED 88-A Rear Brake Light Bracket

Post by Neil Wilson » May 18th, 2020, 7:25 pm

slavalley wrote:
May 18th, 2020, 1:48 pm
Wow Neil, you are amazing, another great write-up!

My truck is an early 30, so it appears I should be looking for part A-13470-B d3 (design 3) for use with the teacup style tail lamp, as you picture in figure 3b (also attached). Scott
Note that A-13470-B is an A chassis bracket (support). So, chances are very likely that you can find one.
Regards, Neil Wilson
______________________________________
neil@aafords.com - use this email for contact
https://aafords.com/ - Ford Model AA Truck Club @ aafords.com

Bob C
Posts: 1320
Joined: April 24th, 2003, 11:50 am
Body Type: Mail truck, Stake tr
Model Year: 1931
Location: SO CAL

Re: WANTED 88-A Rear Brake Light Bracket

Post by Bob C » May 19th, 2020, 8:55 am


slavalley
Posts: 35
Joined: January 19th, 2020, 5:11 pm
Body Type: 88-A
Model Year: 1931

Re: WANTED 88-A Rear Brake Light Bracket

Post by slavalley » May 26th, 2020, 8:11 pm

Thanks Bob for the link. Bought it, and now have it in my hands. One more box checked :)

Scott

Post Reply