aa-fords.com

Hello All,

I'm in search for the rear brake light and license plate bracket.

Thx, Scott

https://www.snydersantiqueauto.com/Prod ... hByKeyword

https://www.snydersantiqueauto.com/Prod ... hByKeyword

The A13406 bracket Snyders sells is for 1929 and later. The photo of the truck above shows the 1928 style tail light. This tail light and bracket are one piece, that is the licence plate bracket and the back of the tail light is one piece. Sound confusing? On the top of the tail light on the truck above is the word Duolight. In 1929 when the replaced it with the teacup shaped tail light they changed the name on the top to read Duolamp. A13406 fits the Duolamp.

slavalley wrote: ↑

May 5th, 2020, 9:04 am

Hello All,

I'm in search for the rear brake light and license plate bracket. Thx, Scott

My guess is that you are looking for the support AA-13472. See attached - note the part id (raised).

And, yes, Chris' link looks to be that support. It likely does not have the part id.

https://www.snydersantiqueauto.com/Prod ... hByKeyword

Thanks Chris for the links, didn't think to try Synder's.

Thanks again Neil for helping guide me through my rebuild.

If anyone has an original bracket w/ the raised part number, I would be interested.

Scott

My 29 has the same one piece tail light/ licence plate bracket as the one in the photo....but the bracket bolts flat to the bottom of the frame with 3 bolts. ....... greg

gad62 wrote: ↑

May 17th, 2020, 1:49 pm

My 29 has the same one piece tail light/ licence plate bracket as the one in the photo....but the bracket bolts flat to the bottom of the frame with 3 bolts. ....... greg

My Early '30 (May 1930) has the three holes in the frame on both sides.

Can you guys post pictures?

slavalley wrote: ↑

May 18th, 2020, 9:04 am

Can you guys post pictures?

slavalley, I can see that the information being talked about is becoming a little off your subject. For details regarding Tail Lamp Brackets (Supports) you can refer to https://aafords.com/aa-chassis/aa-13510-electrical/. This link will provide another link to download an "AA Truck Talk - AA Lamps & Wiring" article (published April 2011). Page 3 starts the information regarding "Brackets (Supports)". I hope this helps.

Wow Neil, you are amazing, another great write-up!

My truck is an early 30, so it appears I should be looking for part A-13470-B d3 (design 3) for use with the teacup style tail lamp, as you picture in figure 3b (also attached).

Scott

slavalley wrote: ↑

May 18th, 2020, 1:48 pm

Wow Neil, you are amazing, another great write-up!

My truck is an early 30, so it appears I should be looking for part A-13470-B d3 (design 3) for use with the teacup style tail lamp, as you picture in figure 3b (also attached). Scott

Note that A-13470-B is an A chassis bracket (support). So, chances are very likely that you can find one.

There is one on Ebay. https://www.ebay.com/itm/28-29-30-31-Fo ... Z6&vxp=mtr

Thanks Bob for the link. Bought it, and now have it in my hands. One more box checked

Scott