Page 1 of 1
Wanted: Speedometer driven gear and bearing/housing assembly, high ratio rear end
Posted: May 5th, 2020, 10:41 am
by Post hole digger
I am looking for a speedometer driven gear and bearing/housing assembly that threads into the drive shaft housing for my late 1930 AA. My rear axle is the high ratio ring and pinion with the 7-36 tag. I would sure like to have a functioning speedometer, thank you for your help!
Re: Wanted: Speedometer driven gear and bearing/housing assembly, high ratio rear end
Posted: May 12th, 2020, 8:45 am
by rustya1928
Hi:
I have a 5:14 driven gear and the screw in housing. I also repo the hi speed tags if you need them. I want $125.00 for the gear and $25.00 for the housing. I am in No. Calif. Shipping extra . I only have one left so let me know. You can contact me at 530-647-2900 or e-mail at
rustya1931@hotmail.com
Re: Wanted: Speedometer driven gear and bearing/housing assembly, high ratio rear end
Posted: May 19th, 2020, 12:44 pm
by cokefirst
Snyders has the gear. it is about $80-90. I put one in mine and it works perfect
Re: Wanted: Speedometer driven gear and bearing/housing assembly, high ratio rear end
Posted: May 27th, 2020, 2:34 pm
by Post hole digger
Snyder's is out of stock, not available. Thank you RustyA for your help!