89-A Express Installation Hardware

Here you can put your AA parts for sale, and wanted posts.
Post Reply
User avatar
Neil Wilson
Posts: 2915
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

89-A Express Installation Hardware

Post by Neil Wilson » September 11th, 2020, 2:38 pm

If you are interested in the following, then email me at neil@aafords.com.

I am thinking about another run to produce the installation hardware for the 89-A express. There will be three different sets (A, B and C). Each set is for a particular AA truck and 89-A express design. Each set will be $600 to $700 (yet to be determined). The set information is below:

Set-A for hardware versions 1,2,3 - 16 floor tie straps and 8 bars
Set-B for hardware version 4 - 12 floor tie straps, 6 bars, and 2 body-to-frame brackets
Set-C for hardware version 5 - 12 floor tie straps, 6 bars, and 2 body-to-frame brackets

For information about hardware versions 1-5 see https://aafords.com/open-bodies/express ... ails/#ihvt.

A set will need to be paid for up-front since I will not be producing an inventory to sell. It will likely take two years to finish the run and have sets shipped.
Attachments
89-A-floor-tie-straps(6types)-q8.jpg
89-A-floor-tie-straps(6types)-q8.jpg (343.99 KiB) Viewed 1408 times
Bars-Bracket-q8.jpg
Bars-Bracket-q8.jpg (447.99 KiB) Viewed 1408 times
Regards, Neil Wilson
______________________________________
neil@aafords.com - use this email for contact
https://aafords.com/ - Ford Model AA Truck Club @ aafords.com

gad62
Posts: 32
Joined: March 19th, 2019, 8:44 am
Body Type: Express
Model Year: 1929
Location: Ohio

Re: 89-A Express Installation Hardware

Post by gad62 » September 13th, 2020, 2:42 pm

So i guess i will be needing set C !

User avatar
Neil Wilson
Posts: 2915
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Re: 89-A Express Installation Hardware

Post by Neil Wilson » September 13th, 2020, 6:47 pm

gad62 wrote:
September 13th, 2020, 2:42 pm
So i guess i will be needing set C !
If "gad62" is actually Greg Denney, then I got your email. Otherwise, gad62, please send me an email at neil@aafords.com
Regards, Neil Wilson
______________________________________
neil@aafords.com - use this email for contact
https://aafords.com/ - Ford Model AA Truck Club @ aafords.com

gad62
Posts: 32
Joined: March 19th, 2019, 8:44 am
Body Type: Express
Model Year: 1929
Location: Ohio

Re: 89-A Express Installation Hardware

Post by gad62 » September 13th, 2020, 6:55 pm

That would be me Neil.....thank you.....Greg

User avatar
Neil Wilson
Posts: 2915
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Re: 89-A Express Installation Hardware

Post by Neil Wilson » October 20th, 2020, 7:58 am

If you are interested in this installation hardware, email me - neil@aafords.com (note - Russ Smith and Greg Denney are on my customer list).

I am getting closer to starting another run of the 89-A Express installation hardware. It is planned that hardware sets will include the following:

floor tie straps (12 straps - 16 straps for early 1928)
bars (6 or 8 for early 1928)
"L" brackets (2 or none for early 1928)
bolts (12 or 16 for early 1928)
plates (6 or 8 for early 1928)

Attached is an example of a set for mid 1928 through mid 1929. Note that the 1/2-13 (1/2 x 7/8) hex nuts will not be included. Nuts can be ordered by each customer from other suppliers such as McMaster-Carr (see https://www.mcmaster.com/95045A033/).
Attachments
Sell x89-A Express Mounting Hardware - 6 pair A set .jpg
Sell x89-A Express Mounting Hardware - 6 pair A set .jpg (199.84 KiB) Viewed 873 times
Regards, Neil Wilson
______________________________________
neil@aafords.com - use this email for contact
https://aafords.com/ - Ford Model AA Truck Club @ aafords.com

Post Reply