Page 1 of 1
28-29 AA 4686 torque tube grease retainer
Posted: August 14th, 2021, 5:21 pm
by rustya1928
Looking for a NOS or good original torque tube grease retainer for the worm drive end of the drive shaft/torque tube. This holds the felt grease seal in and keeps the worm bearing from walking forward.
Thanks
Re: 28-29 AA 4686 torque tube grease retainer
Posted: August 14th, 2021, 6:00 pm
by Bob C
Re: 28-29 AA 4686 torque tube grease retainer
Posted: August 15th, 2021, 8:41 am
by rustya1928
Bob:
Thanks, but what I am looking for is a better grease retainer that is metal and goes in the worm gear end of the torque tube and has a heavy felt grease sponge,( for lack of what to call it), in it. It goes up against the washer and front roller bearing of the worm. Any help is great, thanks.
Re: 28-29 AA 4686 torque tube grease retainer
Posted: August 15th, 2021, 10:59 am
by Rumbler
I'd try Tom Godish of Model A Ford Works, Portland OR. 503-282-2212. He helped me out with some inner rear axle felt seals and retainer cups for my early '28 worm drive axle.