29 AA restorod
-
- Posts: 52
- Joined: January 28th, 2011, 6:26 am
- Body Type: 82a
- Model Year: 1929
- Location: Windber Pa.
Re: 29 AA restorod
Heres some more! I think Im addicted to this now that I got it working. Radar
- Attachments
-
- DSCN0815.JPG (32.72 KiB) Viewed 92194 times
-
- DSCN0833.JPG (32.45 KiB) Viewed 92194 times
-
- DSCN0813.JPG (35.92 KiB) Viewed 92194 times
-
- Posts: 8
- Joined: January 19th, 2011, 8:30 am
- Model Year: 1930
Re: 29 AA restorod
Looks good.......
Did you box the frame, or will it be sturdy enough?
Did you box the frame, or will it be sturdy enough?
-
- Posts: 52
- Joined: January 28th, 2011, 6:26 am
- Body Type: 82a
- Model Year: 1929
- Location: Windber Pa.
Re: 29 AA restorod
Bob, the frame is boxed from the front crossmember to the motor mounts and in the rear where I c'ed the frame for axle clearance. The center of the frame is plenty strong enough to handle the weight and tourque of my build. I'm tearing it down for paint and will post some pics. If anyone wants to know what all parts I used I can list them for you. Radar
- Attachments
-
- DSCN0821.JPG (33.73 KiB) Viewed 92162 times
-
- DSCN0817.JPG (35.55 KiB) Viewed 92162 times
-
- Posts: 52
- Joined: January 28th, 2011, 6:26 am
- Body Type: 82a
- Model Year: 1929
- Location: Windber Pa.
Re: 29 AA restorod
Thanks for all the positive comments! Wasn't sure if my project would be accepted here. Radar
-
- Posts: 52
- Joined: January 28th, 2011, 6:26 am
- Body Type: 82a
- Model Year: 1929
- Location: Windber Pa.
Re: 29 AA restorod
It's been quite awhile so heres an update. The chassis is complete and painted,the brakes work,engine and trans installed,and the steering works well. I built a steel floor from 16ga scrap. I'll try some pic. Radar
- Attachments
-
- DSCN3435.JPG (38.36 KiB) Viewed 91952 times
-
- DSCN3431.JPG (35.01 KiB) Viewed 91952 times
-
- DSCN3433.JPG (37.61 KiB) Viewed 91952 times
- Chris Haynes
- Posts: 2207
- Joined: September 7th, 2003, 5:18 pm
- Body Type: 82A
- Model Year: 1930
- Location: Camarillo, CA
Re: 29 AA restorod
Do you have the original firewall?
- spectria
- Posts: 1874
- Joined: May 15th, 2008, 9:53 pm
- Body Type: Mail Truck, Stakebed
- Model Year: 1931
- Location: Quincy, Ca.
Re: 29 AA restorod
Looking very good!Radar wrote:It's been quite awhile so heres an update. The chassis is complete and painted,the brakes work,engine and trans installed,and the steering works well. I built a steel floor from 16ga scrap. I'll try some pic. Radar
Dave in Quincy, Ca. I love Pics!!!! Post them All!!!
Join the Ford Model AA Truck Club - membership form at http://www.fmaatc.org
Join the Ford Model AA Truck Club - membership form at http://www.fmaatc.org
-
- Posts: 52
- Joined: January 28th, 2011, 6:26 am
- Body Type: 82a
- Model Year: 1929
- Location: Windber Pa.
Re: 29 AA restorod
Yes Chris but I used it in reconstructive surgery. The orginal setback for the engine is now the hump to clear the bellhousing and the ends are still in the firewall.
-
- Posts: 52
- Joined: January 28th, 2011, 6:26 am
- Body Type: 82a
- Model Year: 1929
- Location: Windber Pa.
Re: 29 AA restorod
Here's a couple of more pics. we're making some progress! Radar
- Attachments
-
- DSCN3448.JPG (35.09 KiB) Viewed 91858 times
-
- DSCN3438.JPG (41.46 KiB) Viewed 91858 times
-
- DSCN3440.JPG (38.05 KiB) Viewed 91858 times
Re: 29 AA restorod
great work!
I was looking at the clereance between the front axel and the ubolt nuts. (mine hit). It appears you have a reversed eye spring and a stock cross member? is there a spacer above the spring?
I was looking at the clereance between the front axel and the ubolt nuts. (mine hit). It appears you have a reversed eye spring and a stock cross member? is there a spacer above the spring?
-
- Posts: 52
- Joined: January 28th, 2011, 6:26 am
- Body Type: 82a
- Model Year: 1929
- Location: Windber Pa.
Re: 29 AA restorod
Its been quite a while but after spending a couple of years on the road building roads I fired up my hot rod AA last week !!! What a great feeling hope to have it on the road this year !!
-
- Posts: 52
- Joined: January 28th, 2011, 6:26 am
- Body Type: 82a
- Model Year: 1929
- Location: Windber Pa.
Re: 29 AA restorod
More !