Hello, new guy here.
-
- Posts: 79
- Joined: September 14th, 2012, 2:18 am
- Body Type: Fire truck
- Model Year: 1930
- Location: Manchester, NH
Hello, new guy here.
Hi everyone,
I consult for a Town that has a 1930 Ford Model AA fire truck. The Town does not appropriate money for its maintenance. Therefore, I am going to take it upon myself to get the truck running.
I have heard that it will start, but stop running after it has warmed up. The Town did have a mechanic on staff to maintain it, but this problem puzzled him for a couple of year before he retired. I think there is rust in the tank, which plugs the fuel line/carburetor. Thoughts? Also, are there any issues starting the truck after three years sitting?
I have pictures of it, but I can not post them with my phone. I will post them later.
I consult for a Town that has a 1930 Ford Model AA fire truck. The Town does not appropriate money for its maintenance. Therefore, I am going to take it upon myself to get the truck running.
I have heard that it will start, but stop running after it has warmed up. The Town did have a mechanic on staff to maintain it, but this problem puzzled him for a couple of year before he retired. I think there is rust in the tank, which plugs the fuel line/carburetor. Thoughts? Also, are there any issues starting the truck after three years sitting?
I have pictures of it, but I can not post them with my phone. I will post them later.
-
- Posts: 752
- Joined: March 9th, 2009, 8:06 pm
- Body Type: 75-A
- Model Year: 1930
- Location: Sacramento, Ca.
Re: Hello, new guy here.
Will the truck start after it die after about 5 mins. choking it. If so it may be a fuel problem. If you are getting fuel to the carb. and can drain gas for the cab. after it dies, If it don't start check to see if you are getting a spark at the points and to the spark plug (you need a blue spark not red or yellow) You may need to replace the condenser in the distributor!!! Good luck!!!Shelby, Louisiana.
-
- Posts: 496
- Joined: April 25th, 2005, 2:25 pm
- Model Year: 1930
- Location: Ojai, California
Re: Hello, new guy here.
Imnagell:
You could unhook the gas line from the gas tank. Then, jury-rig a clean gas can so that it screws onto the gas line to the carb. If the truck keeps running, then you'll know that it's crud in the gas tank that's causing the problem.
Good Luck!
-- Drew
You could unhook the gas line from the gas tank. Then, jury-rig a clean gas can so that it screws onto the gas line to the carb. If the truck keeps running, then you'll know that it's crud in the gas tank that's causing the problem.
Good Luck!
-- Drew
Drew Mashburn
- gunmetal
- Posts: 304
- Joined: August 21st, 2010, 7:28 am
- Body Type: 188-A
- Model Year: 1929
- Location: Milford, Indiana
Re: Hello, new guy here.
Just wanted to say Hello and Welcome to the form. Good luck with the truck post some pics if you would please.
- Brady
- Posts: 361
- Joined: October 21st, 2003, 1:38 pm
- Body Type: None
- Model Year: 1930
- Location: Norwich, NY 13815
Re: Hello, new guy here.
It could be something as simple as the gas tank cap not venting properly - try running it without the cap. It could even be the junction box on the firewall shorting out once the warm-up takes place. Keep searching, and very best of luck. Keep us posted.
- gunmetal
- Posts: 304
- Joined: August 21st, 2010, 7:28 am
- Body Type: 188-A
- Model Year: 1929
- Location: Milford, Indiana
Re: Hello, new guy here.
Is the condensor in distributor getting hot and failing so it dies.
-
- Posts: 80
- Joined: December 16th, 2009, 4:57 am
- Body Type: 82-A
- Model Year: 1929
- Location: Mount Pleasant, MI 48858
Re: Hello, new guy here.
You could check the ignition coil by taking the coil wire off the distribitor and holding the wire an inch from a head bolt while
turning the motor over. You should get a bright blue spark. I had a coil that would get hot on the outside and then not
produce a good spark.
turning the motor over. You should get a bright blue spark. I had a coil that would get hot on the outside and then not
produce a good spark.
-
- Posts: 79
- Joined: September 14th, 2012, 2:18 am
- Body Type: Fire truck
- Model Year: 1930
- Location: Manchester, NH
Re: Hello, new guy here.
Thanks for all the advice.
I did plan on bypassing the gas tank with a small tank. I was planning on replacing the points and condensor, but I will accelerate that process.
I did plan on bypassing the gas tank with a small tank. I was planning on replacing the points and condensor, but I will accelerate that process.
- Chris Haynes
- Posts: 2203
- Joined: September 7th, 2003, 5:18 pm
- Body Type: 82A
- Model Year: 1930
- Location: Camarillo, CA
Re: Hello, new guy here.
What town? I am sure we have someone nearby who can lend a hand.
-
- Posts: 79
- Joined: September 14th, 2012, 2:18 am
- Body Type: Fire truck
- Model Year: 1930
- Location: Manchester, NH
Re: Hello, new guy here.
Here are some pictures of the fire truck.
- Attachments
-
- IMG_0027 (2).jpg (81 KiB) Viewed 9989 times
-
- IMG_0026 (2).jpg (88.79 KiB) Viewed 9989 times
-
- IMG_0025 (2).jpg (73.94 KiB) Viewed 9989 times
-
- Posts: 79
- Joined: September 14th, 2012, 2:18 am
- Body Type: Fire truck
- Model Year: 1930
- Location: Manchester, NH
Re: Hello, new guy here.
Here are some more.
- Attachments
-
- IMG_0030 (2).jpg (69.65 KiB) Viewed 9988 times
-
- IMG_0029 (2).jpg (42.24 KiB) Viewed 9988 times
-
- IMG_0028 (2).jpg (50.86 KiB) Viewed 9988 times
-
- Posts: 79
- Joined: September 14th, 2012, 2:18 am
- Body Type: Fire truck
- Model Year: 1930
- Location: Manchester, NH
Re: Hello, new guy here.
The Truck belongs to the Town of Newmarket, NH. The Town is a NH seacoast town, which is more famous for its hand tub than its fire truck. To find out what a hand tub is (which is a horse drawn fire pumper), check out the hand tub parade at http://www.youtube.com/watch?v=sSIBXcyHOOQ.
I think it will be good for the community to have something that will bring it together.
How do I know it is 6 or 12 volts? I suspect it is a six volt system, because the condenser has not been updated to a modern style. Regardless, I found the gas tank full of fuel, which smells like turpintine. So, I am going to drain the fuel and clean the carb next week while putting mystery oil in the cylinders and working them out prior to starting it.
I think it will be good for the community to have something that will bring it together.
How do I know it is 6 or 12 volts? I suspect it is a six volt system, because the condenser has not been updated to a modern style. Regardless, I found the gas tank full of fuel, which smells like turpintine. So, I am going to drain the fuel and clean the carb next week while putting mystery oil in the cylinders and working them out prior to starting it.
- gunmetal
- Posts: 304
- Joined: August 21st, 2010, 7:28 am
- Body Type: 188-A
- Model Year: 1929
- Location: Milford, Indiana
Re: Hello, new guy here.
make sure you put oil down the distributer shaft hole. and in value compartment. this is were oil start oil the main bearings from. Thanks for the pics. Wish you the best of luck and wish I was there to help.
Re: Hello, new guy here.
Reminds me of my brother buying a 28 Roadster pickup back in the sixtys. We towed and or pushed that car for miles and it would not start. Of course now you ask the 'Ol man' who simply replied "Did you turn the fuel on?" Started right up-Dads are really smart-all you have to do is ask!! Is the fuel shut-off open all the way? But the smell of the fuel is a dead givaway.If it's old fuel it will probably still work but the new fuel they sell you now doesn't keep. Anybody else notice that? Den
- miner art
- Posts: 295
- Joined: March 22nd, 2005, 8:27 am
- Body Type: AA flt.BD.82a
- Model Year: 1929
- Location: gold hill oregon,97525
Re: Hello, new guy here.
HA! that sound''s like when I bought a 27' roadster pickup 50 buck's!!!!buddy and I pushed the car for about 3 MI. some down hill,What a rush at 12 years old!!!!Them thing's need gas????? YEP!!!..................farmerden wrote:Reminds me of my brother buying a 28 Roadster pickup back in the sixtys. We towed and or pushed that car for miles and it would not start. Of course now you ask the 'Ol man' who simply replied "Did you turn the fuel on?" Started right up-Dads are really smart-all you have to do is ask!! Is the fuel shut-off open all the way? But the smell of the fuel is a dead givaway.If it's old fuel it will probably still work but the new fuel they sell you now doesn't keep. Anybody else notice that? Den