door striker plate shild
- macswoods
- Posts: 313
- Joined: May 4th, 2009, 1:20 pm
- Body Type: 82-A
- Model Year: 1929
- Location: Wilhoit, Arizona
door striker plate shild
I am rebuilding the door latches in my 29 AA. Can any one post a photo of how/where the door striker plate shield is mounted on the door post, part # is A65029S ( out of Macs catalog) Thanks Mac....
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: door striker plate shild
FYI - Vendor catalogs are mostly not in part number sequence. It would be better to post the catalog year and page (followed by their part #). And vendor part numbers normally have no relationship to original Ford parts numbers.
- Attachments
-
- xDoor Lock Striker Plates.jpg (63.15 KiB) Viewed 3762 times
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
-
- Posts: 1442
- Joined: April 24th, 2003, 11:50 am
- Body Type: Mail truck, Stake tr
- Model Year: 1931
- Location: SO CAL
Re: door striker plate shild
- Attachments
-
- A65029S_pJPG.JPG (5.37 KiB) Viewed 3757 times
- macswoods
- Posts: 313
- Joined: May 4th, 2009, 1:20 pm
- Body Type: 82-A
- Model Year: 1929
- Location: Wilhoit, Arizona
Re: door striker plate shild
thanks you all, that is the part.Also thank you Neil for the photo. Mac.....
Re: door striker plate shild
now i'm confused. (ok not a dificult thing to do)
I have the vintique door striker plate for the 28/29 pickup part no a-80331 which looks like the closeup of the older door frame a few post able, which leads to two questions:
A) how is this part mounted to the wood, a pair of wood scres?
b) what is the flat plate shown above? where does it fit?
I have the vintique door striker plate for the 28/29 pickup part no a-80331 which looks like the closeup of the older door frame a few post able, which leads to two questions:
A) how is this part mounted to the wood, a pair of wood scres?
b) what is the flat plate shown above? where does it fit?