I need to replace all the rubber around my windshield frame. Can somebody please give me some advice on how to remove the old rubber and install the new. I have the frame apart and removed the glass.
I would like to see a picture of a windshield that is all done.
Thank you for any help.
Pat
Windshield rubber
-
- Posts: 133
- Joined: March 11th, 2007, 6:57 pm
- Body Type: 82A
- Model Year: 1928
- Location: Skowhegan, Maine
-
- Posts: 1223
- Joined: June 14th, 2007, 7:29 pm
- Body Type: Grainbox
- Model Year: 1929
- Location: Illinois
Re: Windshield rubber
I dont have any advice but usually the vendors sell a kit with the new rubber and tools and instructions.
I think ive heard using soapy water using baby shampoo to ease everything in place easier (lets rubber slide around ALOT easier)
I think ive heard using soapy water using baby shampoo to ease everything in place easier (lets rubber slide around ALOT easier)
- rollingsculpture
- Posts: 553
- Joined: December 9th, 2008, 7:30 am
- Body Type: platform
- Model Year: 1931
- Location: Takoma Park maryland
Re: Windshield rubber
scrape out all old material , repaint inside of frame to avoid rust , set in rubber gasket into frame , slide in glass, set bottom on set screws to hold all together and your good
- Attachments
-
- align glass in gasket and frame.jpg (84.58 KiB) Viewed 3560 times
-
- pre set rubber gasket.jpg (87.16 KiB) Viewed 3560 times
- rollingsculpture
- Posts: 553
- Joined: December 9th, 2008, 7:30 am
- Body Type: platform
- Model Year: 1931
- Location: Takoma Park maryland