rear spring pivot
-
- Posts: 91
- Joined: January 17th, 2011, 8:11 pm
- Body Type: AA
- Model Year: 1929
- Location: Dickinson, North Dakota
rear spring pivot
im sure this has been talked about before and im not the only one with this issue... the pivot points on one of my AAs springs is so wore out that I don't think theirs any coming back from it do they make reproduction piviot shafts or do I need to fab something up
-
- Posts: 603
- Joined: May 15th, 2010, 2:34 pm
- Body Type: dump
- Model Year: 1930
- Location: Eastern, CT
Re: rear spring pivot
I don't think that anyone reproduces the pivot pins. I think what most people do is weld them up and grind/machine them down or try to find good used ones.
Red
Red
- macswoods
- Posts: 313
- Joined: May 4th, 2009, 1:20 pm
- Body Type: 82-A
- Model Year: 1929
- Location: Wilhoit, Arizona
Re: rear spring pivot
My pivots were worn on the bottom, so I welded on the pivots in the worn areas and am now grinding/fileing them back to
round. Using calipers to get em close. See pictures, Mac.......
round. Using calipers to get em close. See pictures, Mac.......
- Attachments
-
- 100_6256 (500x375).jpg (293.94 KiB) Viewed 3274 times
-
- 100_6257 (500x375).jpg (285.16 KiB) Viewed 3274 times
- Chris Haynes
- Posts: 2204
- Joined: September 7th, 2003, 5:18 pm
- Body Type: 82A
- Model Year: 1930
- Location: Camarillo, CA
Re: rear spring pivot
Somebody here made a tool to recut the pivot shaft to make it round agagin.
-
- Posts: 753
- Joined: August 11th, 2013, 4:25 pm
- Body Type: 82-A Platform
- Model Year: 1928
- Location: Hamilton, Mich.
Re: rear spring pivot
Yup: I just finished welding up one of mine. Filed it round, used a peice of sheet metal with a hole the corect size in it to find the high spots and filed away. Dose not have to be exactly round as it only "rocks" back and forth a few degrees. I used 6013 rod and then coated it with "slip plate" before assembly.
Start welding and it will work out fine...
KVO
Start welding and it will work out fine...
KVO
KVO
Dec. '28 AA
Dec. '28 AA