AA Ford Discussion Group relating to the repair and restoration of your AA Ford.
Langan
Posts: 71 Joined: August 7th, 2017, 11:44 am
Body Type: 29 closed
Model Year: 1929
Post
by Langan » September 2nd, 2017, 7:32 pm
What dia. are the Kingpins?
Are there any long spring perches avaible for shocks?
And last were can i find shackle bussings, kingpins and other axle parts
Thanks
Langan
Posts: 71 Joined: August 7th, 2017, 11:44 am
Body Type: 29 closed
Model Year: 1929
Post
by Langan » September 3rd, 2017, 9:02 am
Anyone out there?
Bob C
Posts: 1442 Joined: April 24th, 2003, 11:50 am
Body Type: Mail truck, Stake tr
Model Year: 1931
Location: SO CAL
Post
by Bob C » September 3rd, 2017, 11:03 am
I measured a new king pin and it was 1.004. Model A rear shackles are the same as AA front.
King pins show up fairly often on Ebay.
Bob
flatford39
Posts: 474 Joined: September 24th, 2009, 3:06 pm
Body Type: Express
Model Year: 1928
Location: NE Illinois
Post
by flatford39 » September 3rd, 2017, 12:59 pm
Longer spring perches for the 31 are not available as far as I know. On my 28 I have them and yes they are a tad longer than the cars. Will 28 spring perches work in a 31 AA front axle??? I don't have the answer to that. Maybe someone else will chime in.
Langan
Posts: 71 Joined: August 7th, 2017, 11:44 am
Body Type: 29 closed
Model Year: 1929
Post
by Langan » September 3rd, 2017, 8:54 pm
Thanks Bob
Now if i can figure out best way to bore axle ends to 1.055? Thinking of drilling to 1.032 then use a expanable reamer?
Last edited by
Langan on September 4th, 2017, 8:28 am, edited 1 time in total.
Langan
Posts: 71 Joined: August 7th, 2017, 11:44 am
Body Type: 29 closed
Model Year: 1929
Post
by Langan » September 3rd, 2017, 9:06 pm
Trying to post pictures?
Last edited by
Langan on September 4th, 2017, 8:29 am, edited 1 time in total.
Langan
Posts: 71 Joined: August 7th, 2017, 11:44 am
Body Type: 29 closed
Model Year: 1929
Post
by Langan » September 3rd, 2017, 9:18 pm
Thanks Fatford39
Bob C
Posts: 1442 Joined: April 24th, 2003, 11:50 am
Body Type: Mail truck, Stake tr
Model Year: 1931
Location: SO CAL
Post
by Bob C » September 5th, 2017, 8:41 am
Why are you boring the ends of the axle?
Bob
Langan
Posts: 71 Joined: August 7th, 2017, 11:44 am
Body Type: 29 closed
Model Year: 1929
Post
by Langan » September 5th, 2017, 1:33 pm
I am installing modern brakes and the new spindle kingpins are 1.055 or .050 bigger than stock. I am looking for another 31 axle?
Bob C
Posts: 1442 Joined: April 24th, 2003, 11:50 am
Body Type: Mail truck, Stake tr
Model Year: 1931
Location: SO CAL
Post
by Bob C » September 5th, 2017, 2:34 pm
Langan wrote: ↑ September 5th, 2017, 1:33 pm
I am installing modern brakes and the new spindle kingpins are 1.055 or .050 bigger than stock. I am looking for another 31 axle?
OK, 1930-34 front axles are the same.
Bob
Langan
Posts: 71 Joined: August 7th, 2017, 11:44 am
Body Type: 29 closed
Model Year: 1929
Post
by Langan » September 5th, 2017, 4:43 pm
Bob any ideas were to get one? Ford Barn and here are only places i have looked
Stakebed
Posts: 1223 Joined: June 14th, 2007, 7:29 pm
Body Type: Grainbox
Model Year: 1929
Location: Illinois
Post
by Stakebed » September 5th, 2017, 5:02 pm
Where are you at as they are heavy to ship - never know whos got one a street over from you
Langan
Posts: 71 Joined: August 7th, 2017, 11:44 am
Body Type: 29 closed
Model Year: 1929
Post
by Langan » September 5th, 2017, 8:36 pm
Sequim Washington is were i live . I fly out of Seattle for work in Los Angeles every other week