AA 1015C d4
AA 1015C d4
I purchased two 20" wheels that are slightly different than AA wheels. The center hole dia. is 5-5/8, one inch larger and the ctr-ctr mtg holes are 4-5/8, 5/8 inch further apart than the AA. Otherwise they are identical. Anyone know what they fit?
-
- Posts: 753
- Joined: August 11th, 2013, 4:25 pm
- Body Type: 82-A Platform
- Model Year: 1928
- Location: Hamilton, Mich.
Re: AA 1015C d4
Wire spoke or dish? and where did you get that # from? Probably Canadian? or Egyptian.
KVO
Dec. '28 AA
Dec. '28 AA
-
- Posts: 1446
- Joined: April 24th, 2003, 11:50 am
- Body Type: Mail truck, Stake tr
- Model Year: 1931
- Location: SO CAL
Re: AA 1015C d4
The AA wheel is 5 on 6 7/8", late 1934 and after are 5 on 8".
Bob
Bob
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: AA 1015C d4
You can find AA wheel dimensions information at http://aafords.com/aa-chassis/aa-1000-wheels/#wd. The bolt pattern was 6-7/8" for all but the AA-1015-E (1931 steel spoke wheel) which was 8".
Just include pictures! I don't know what "ctr-ctr mtg holes" means? Measure the bolt pattern (see the link for what this means).
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
Re: AA 1015C d4
The 5 hole wheel pattern is 9" outside edge , 7-1/2 on center. 20" wheel.
- Attachments
-
- 20171015_075634-773x759.jpg (244.48 KiB) Viewed 4833 times
Re: AA 1015C d4
The aa-ford site.KimVanOrder wrote: ↑October 11th, 2017, 5:27 pmWire spoke or dish? and where did you get that # from? Probably Canadian? or Egyptian.
- Attachments
-
- 20171015_084756.png (168.5 KiB) Viewed 4832 times
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: AA 1015C d4
FYI - That's the aafords.com site at http://aafords.com/ (not aa-ford)Tim/va. wrote: ↑October 15th, 2017, 6:02 amThe aa-ford site.KimVanOrder wrote: ↑October 11th, 2017, 5:27 pmWire spoke or dish? and where did you get that # from? Probably Canadian? or Egyptian.
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/