28 express bed for sale
28 express bed for sale
i have an express bed, 28, complete with side mount spare, except no chains. one rear fender bracket. needs to be repaired from horizontal groove on side down and headboard. I just repaired one in same condition. A good start for a very rare bed. I am in CT, $1850 plus shipping.
- Attachments
-
- 4.jpeg (665.23 KiB) Viewed 9121 times
-
- 3.jpeg (707.83 KiB) Viewed 9121 times
-
- 2.jpeg (793.7 KiB) Viewed 9121 times
Last edited by birdacre on October 17th, 2017, 2:51 pm, edited 4 times in total.
-
- Posts: 110
- Joined: June 24th, 2011, 7:35 pm
- Body Type: 188a
- Model Year: 1928
- Location: Tofield, Alberta , canada
Re: 28 express bed for sale
Would really like to see some photos.
Re: 28 express bed for sale
i will post some photos asap. hope all is well. kevin
Re: 28 express bed for sale
if you send your email to me on PM i will email photos. i now have them. kevin
Re: 28 express bed for sale
Here are 2 more pictures
- Attachments
-
- 6.jpeg (585.8 KiB) Viewed 9118 times
-
- 5.jpeg (631.29 KiB) Viewed 9118 times
Re: 28 express bed for sale
should have more photos in a few days.
- Chris Haynes
- Posts: 2204
- Joined: September 7th, 2003, 5:18 pm
- Body Type: 82A
- Model Year: 1930
- Location: Camarillo, CA
Re: 28 express bed for sale
I have one in about the same condition. I need to find someone to reproduce the rusted away bottom part.
- s147881
- Posts: 425
- Joined: April 13th, 2007, 8:09 pm
- Body Type: stake bed 82A
- Model Year: 1930
- Location: Decatur Michigan
Re: 28 express bed for sale
I had a local sheet metal company roll the side radius and then bend the lower section to fit the wood support. They were able to bend at the correct angle to make it fit correct on the frame. I got the drawing from the aa truck web site. I used 14 gauge mild steel. They are limited to 8’ lengths as there roller is only 8’. They are located in kalamazoo Michigan. Allied Mechanical Sheetmetal- Larry Decker. Cost was 250.00 for pair three years ago.
Re: 28 express bed for sale 1500???
not sure if 1500 would attract any attention. i know the spare holder can go for 4 or 500. good tailgate 300, sides are good start, headboard a start, and one rear fender bracket, hard to come by. any interest at 1500? my bed came out beautiful with new sides butt welded from the horizontal groove down.
Re: 28 express bed for sale
Re: 28 express bed for sale 1500???
Post November 15th, 2017, 3:34 pm
not sure if 1500 would attract any attention. i know the spare holder can go for 4 or 500. good tailgate 300, sides are good start, headboard a start, and one rear fender bracket, hard to come by. any interest at 1500? my bed came out beautiful with new sides butt welded from the horizontal groove down.
Post November 15th, 2017, 3:34 pm
not sure if 1500 would attract any attention. i know the spare holder can go for 4 or 500. good tailgate 300, sides are good start, headboard a start, and one rear fender bracket, hard to come by. any interest at 1500? my bed came out beautiful with new sides butt welded from the horizontal groove down.
Re: 28 express bed for sale 1200
would like to see bed put to use. I would take 1200 for it. pictures are in this thread. hope all is well. kevin in ct please note, needs extensive repair, but can be done. I completed the same last year in order to have an original bed.
- Chris Haynes
- Posts: 2204
- Joined: September 7th, 2003, 5:18 pm
- Body Type: 82A
- Model Year: 1930
- Location: Camarillo, CA
Re: 28 express bed for sale
You said you already repaired one in this condition. I am sure it would be a lot easier to sell if it was repaired. I know I have one like it that is beyond my ability to repair.