28/29 rear wheel stud length.

AA Ford Discussion Group relating to the repair and restoration of your AA Ford.
Post Reply
User avatar
s147881
Posts: 425
Joined: April 13th, 2007, 8:09 pm
Body Type: stake bed 82A
Model Year: 1930
Location: Decatur Michigan

28/29 rear wheel stud length.

Post by s147881 »

I have April 29 AATruck that has 2” long wheel studs on rear. I need to replace them. I called Bert’s and they have 1 3/4 or 2 1/4. lengths only. The 2 1/4 have 1 1/4 inch shaft with 1 inch of thread. My studs have 7/8 shaft with 1 1/8 inch threads. I will be installing wire wheels on this truck. Does anyone know which studs will work best?
User avatar
Neil Wilson
Posts: 3062
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Re: 28/29 rear wheel stud length.

Post by Neil Wilson »

s147881 wrote:
February 21st, 2018, 6:14 am
I have April 29 AATruck that has 2” long wheel studs on rear. I need to replace them. I called Bert’s and they have 1 3/4 or 2 1/4. lengths only. The 2 1/4 have 1 1/4 inch shaft with 1 inch of thread. My studs have 7/8 shaft with 1 1/8 inch threads. I will be installing wire wheels on this truck. Does anyone know which studs will work best?
Post a picture!
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
User avatar
s147881
Posts: 425
Joined: April 13th, 2007, 8:09 pm
Body Type: stake bed 82A
Model Year: 1930
Location: Decatur Michigan

Re: 28/29 rear wheel stud length.

Post by s147881 »

I removed a couple of studs from a hub from scrape pile. They measured 1 3/4”.
bobmay1
Posts: 60
Joined: October 26th, 2017, 4:16 am
Model Year: 1930

Re: 28/29 rear wheel stud length.

Post by bobmay1 »

Image
Image
Image
Looks like the 1.75 inch length is correct for wire wheels.


Sent from my iPhone using Tapatalk
Bob C
Posts: 1442
Joined: April 24th, 2003, 11:50 am
Body Type: Mail truck, Stake tr
Model Year: 1931
Location: SO CAL

Re: 28/29 rear wheel stud length.

Post by Bob C »

The big green parts book shows over all length 2.12, thread 1.09, shoulder .84, shoulder diameter .88.
RH part # AA-1118-A, LH AA-1119-A

Bob
Post Reply