28 AA warford overdrive
28 AA warford overdrive
what ratio was used on the output shaft? were they all the same. is the shifter just engaged and disengaged? any ideas?
-
- Posts: 1442
- Joined: April 24th, 2003, 11:50 am
- Body Type: Mail truck, Stake tr
- Model Year: 1931
- Location: SO CAL
Re: 28 AA warford overdrive
Haven't done the math but a 6.6 rear axle becomes a 4.94 in forth overdrive.
The Warford shifter is used to select under, direct, over, and neutral gears.
The Warford shifter is used to select under, direct, over, and neutral gears.
Re: 28 AA warford overdrive
my rear end is 5:17 it would be neat to figure out the final drive in 4th overdrive. anyone have any ideas?
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: 28 AA warford overdrive
The calculations are already done - see http://aafords.com/aa-information/#mph
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
Re: 28 AA warford overdrive
i had forgotten that there was a warford column. thank you, i hope you are well. kevin