Help
Help
I picked this truck up for a friend, He only wants the body and he wants me to sell the chassis. I might keep it as it has been gone through and a lot of work has been done to the Chassis and engine.
I really don't know what I have and was wondering if this truck is known to any of the members. I picked the truck up in Tyrone Georgia.
I really don't know what I have and was wondering if this truck is known to any of the members. I picked the truck up in Tyrone Georgia.
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
AA Identification
I assume that your friend wants the cab and that there is no cargo body.RoyBean wrote: ↑August 23rd, 2018, 2:09 amI picked this truck up for a friend, He only wants the body and he wants me to sell the chassis. I might keep it as it has been gone through and a lot of work has been done to the Chassis and engine.
I really don't know what I have and was wondering if this truck is known to any of the members. I picked the truck up in Tyrone Georgia.
The chassis is for a 1930/1931 AA and it has 1929 AA wheels. It looks like the frame has been cut off at the rear. Without good photos, not much can be done for identification. If the cab is original to the AA, then it is a January to June 1930.
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
Re: Help
I have been out removing parts. The hardest was the speedo cable so everything has been easy so far. I need to search and find out how to remove the wires from the ignition switch to the distributor.
I pick up two skids tomorrow to build a crate for the cab. The cab is ready to set off except for the wire/cable I mentioned.
I appreciate you time in answering my question. Here are some pictures that will maybe tell you more.
I pick up two skids tomorrow to build a crate for the cab. The cab is ready to set off except for the wire/cable I mentioned.
I appreciate you time in answering my question. Here are some pictures that will maybe tell you more.
-
- Posts: 1223
- Joined: June 14th, 2007, 7:29 pm
- Body Type: Grainbox
- Model Year: 1929
- Location: Illinois
Re: Help
Engine is from 28 but that frame is not. Frame number should be stamped about where your left foot rests on the frame rail while driving. Frame looks pretty good so should be able to see the number.
Just a heads up but those are the wrong rims for those axles and stick out much farther than they should and like Neil said - someones hacked the rear of the frame off (common to do for dumptrucks and other similar bodies)
Looks like a nice project tho! Do we dare ask what is to be done with the body?
Just a heads up but those are the wrong rims for those axles and stick out much farther than they should and like Neil said - someones hacked the rear of the frame off (common to do for dumptrucks and other similar bodies)
Looks like a nice project tho! Do we dare ask what is to be done with the body?
- Chris Haynes
- Posts: 2203
- Joined: September 7th, 2003, 5:18 pm
- Body Type: 82A
- Model Year: 1930
- Location: Camarillo, CA
Re: Help
It breaks my heart to see a AA torn apart to build a hot rod.
Re: Help
It is not going to be a Hot Rod. My friend needs the cab to complete his build. I will look for the frame number. Someone did a excellent job on the engine build and the brakes.
While hauling the truck back from Georgia I got a call from someone I didn't even know wanting to buy the cab. News travels fast.
While hauling the truck back from Georgia I got a call from someone I didn't even know wanting to buy the cab. News travels fast.
-
- Posts: 753
- Joined: August 11th, 2013, 4:25 pm
- Body Type: 82-A Platform
- Model Year: 1928
- Location: Hamilton, Mich.
Re: Help
I found the serial number on 28 on the frame just in front of the body on the drivers side. right by the starter. can see it with the body on.. Looks like a fun project...
KVO
Dec. '28 AA
Dec. '28 AA
Re: Help
I have the body lifted with 2X4 blocks and the only number I can see is 9. I don't know if it is the newer 9 or the older stamp. It started raining on me and I had to quit. I have the skid ready to set the cab on so I can have a better look see. I am learning a lot. I finally got the wire out of the distributor.
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: Help
An original engine id would have an AA prefix. Consequently, the L315925 is just a restamped number and can not be used to determine anything as far as a date. Take a look at http://aafords.com/aa-information/#feidm.
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
Re: Help
Thanks for the input.
My Father in Law died and I have been busy on his Farm trying to help out. We buried him Wednesday. I have to help keep the Farm going and really have too much on my plate.
I have removed the cab and have it on a skid along with the other parts to ship.
Seem like someone took a lot of parts and made what is known as Bitza. A bit of this and a bit of that.
I will probably end up selling the chassis ,hoping I can sell it complete. I might just put it in my shed and see what happens over the cold months.
This is a very informative site and I really enjoy reading all the information ,especially the information that people went through to document these vehicles. Some of the projects show what a wonderful Country we have by the skills and ingenuity of the members here.
My Father in Law died and I have been busy on his Farm trying to help out. We buried him Wednesday. I have to help keep the Farm going and really have too much on my plate.
I have removed the cab and have it on a skid along with the other parts to ship.
Seem like someone took a lot of parts and made what is known as Bitza. A bit of this and a bit of that.
I will probably end up selling the chassis ,hoping I can sell it complete. I might just put it in my shed and see what happens over the cold months.
This is a very informative site and I really enjoy reading all the information ,especially the information that people went through to document these vehicles. Some of the projects show what a wonderful Country we have by the skills and ingenuity of the members here.
- garagekulture13
- Posts: 15
- Joined: July 6th, 2018, 8:50 am
- Model Year: 1930
Re: Help
I too bought an AA from the same gentleman about a month ago.. I saw that truck while I was there. He had an amazing collection. I picked up the 1930 he had for sale.
Also, sorry to hear about your father in law.
Sent from my SM-N950U using Tapatalk
Also, sorry to hear about your father in law.
Sent from my SM-N950U using Tapatalk