Distributor photo

AA Ford Discussion Group relating to the repair and restoration of your AA Ford.
Post Reply
Shorthaul
Posts: 375
Joined: November 15th, 2008, 8:18 am
Body Type: 186 stake
Model Year: 1931
Location: Hawthorne California

Distributor photo

Post by Shorthaul »

Pin through shaft removal. Any ideas, it don't want to move.



IMG_0391.jpg
IMG_0391.jpg (14.34 KiB) Viewed 2602 times
KimVanOrder
Posts: 753
Joined: August 11th, 2013, 4:25 pm
Body Type: 82-A Platform
Model Year: 1928
Location: Hamilton, Mich.

Re: Distributor photo

Post by KimVanOrder »

Very carefully prick punch the center of the pin. then with a very small drill bit, drill it an 1/8 " deep. Then work to a larger bit and on up until the "shoulder" of the Pin is gone. Try punching it out after each bit size and see if it moves. As soon as you see any movement, then try going the other way out. Back and forth, and drill bigger and bigger until it comes out.. I would not go any bigger than 1/8" as I think that is the size of the pin.. Good luck.. :shock:
KVO
Dec. '28 AA
Shorthaul
Posts: 375
Joined: November 15th, 2008, 8:18 am
Body Type: 186 stake
Model Year: 1931
Location: Hawthorne California

Re: Distributor photo

Post by Shorthaul »

Thanks, I’ll give it a try.
Post Reply