While doing brakes on my 1930 AA, discovered a loose king pin. Need a king pin set with pins, bushings and bearings.
They are the large AA pins, 1.004" diameter, pin below actuator drum is app 6" in length
Thank you,
Bill
Wanted: King Pin Set for 1930 AA
-
- Posts: 15
- Joined: July 18th, 2016, 8:14 pm
- Body Type: Utility
- Model Year: 1930
- Location: Philomath, Oregon
Wanted: King Pin Set for 1930 AA
Last edited by Post hole digger on December 5th, 2019, 5:40 pm, edited 1 time in total.
-
- Posts: 15
- Joined: July 18th, 2016, 8:14 pm
- Body Type: Utility
- Model Year: 1930
- Location: Philomath, Oregon
Re: Wanted: King Pin Set for 1930 AA
T Hank you AA Ford Forums! Thanks to Don and Brian, I was able to put a set together from three different sources. Much appreciated!
-
- Posts: 4
- Joined: February 25th, 2019, 8:51 am
- Body Type: Short Bed
- Model Year: 1931
Re: Wanted: King Pin Set for 1930 AA
Just read this successful sourcing of Large Diameter King Pins. Could someone give me a quick lesson on when the AA King Pins switched over from .812 diameter pins to 1.00" diameter pins and associated bushings. Also looking for a source for the larger diameter thrust bearings and bushings. I have four good king pins but need the bearings and possibly the bushings.
-
- Posts: 15
- Joined: July 18th, 2016, 8:14 pm
- Body Type: Utility
- Model Year: 1930
- Location: Philomath, Oregon
Re: Wanted: King Pin Set for 1930 AA
I think 1930 was the switch, the one ton earlier AA used the smaller diameter pins, also used smaller wheel bearings. I had quite a bit of trouble getting the correct wheel bearings.
I was able to get the large bushings from Snyders, but have noticed a lot of their AA merchandise is not available. Using BB numbers helped me get new spindle bearings and the correct outer wheel bearings and races. I sourced through Kaman Bearings, they were really helpful at their shop in Eugene Oregon, they are a major outfit.
Hope this helps!
I was able to get the large bushings from Snyders, but have noticed a lot of their AA merchandise is not available. Using BB numbers helped me get new spindle bearings and the correct outer wheel bearings and races. I sourced through Kaman Bearings, they were really helpful at their shop in Eugene Oregon, they are a major outfit.
Hope this helps!