Wanted: Speedometer driven gear and bearing/housing assembly, high ratio rear end
-
- Posts: 15
- Joined: July 18th, 2016, 8:14 pm
- Body Type: Utility
- Model Year: 1930
- Location: Philomath, Oregon
Wanted: Speedometer driven gear and bearing/housing assembly, high ratio rear end
I am looking for a speedometer driven gear and bearing/housing assembly that threads into the drive shaft housing for my late 1930 AA. My rear axle is the high ratio ring and pinion with the 7-36 tag. I would sure like to have a functioning speedometer, thank you for your help!
-
- Posts: 180
- Joined: April 13th, 2016, 8:26 am
- Body Type: 89
- Model Year: 1928
Re: Wanted: Speedometer driven gear and bearing/housing assembly, high ratio rear end
Hi:
I have a 5:14 driven gear and the screw in housing. I also repo the hi speed tags if you need them. I want $125.00 for the gear and $25.00 for the housing. I am in No. Calif. Shipping extra . I only have one left so let me know. You can contact me at 530-647-2900 or e-mail at rustya1931@hotmail.com
I have a 5:14 driven gear and the screw in housing. I also repo the hi speed tags if you need them. I want $125.00 for the gear and $25.00 for the housing. I am in No. Calif. Shipping extra . I only have one left so let me know. You can contact me at 530-647-2900 or e-mail at rustya1931@hotmail.com
-
- Posts: 53
- Joined: May 16th, 2013, 10:13 am
- Body Type: stake
- Model Year: 1931
- Location: San Bernardino
Re: Wanted: Speedometer driven gear and bearing/housing assembly, high ratio rear end
Snyders has the gear. it is about $80-90. I put one in mine and it works perfect
-
- Posts: 15
- Joined: July 18th, 2016, 8:14 pm
- Body Type: Utility
- Model Year: 1930
- Location: Philomath, Oregon
Re: Wanted: Speedometer driven gear and bearing/housing assembly, high ratio rear end
Snyder's is out of stock, not available. Thank you RustyA for your help!