WANTED 88-A Rear Brake Light Bracket
WANTED 88-A Rear Brake Light Bracket
Hello All,
I'm in search for the rear brake light and license plate bracket.
Thx, Scott
I'm in search for the rear brake light and license plate bracket.
Thx, Scott
- Attachments
-
- rear brake bracket.JPG (36.64 KiB) Viewed 9635 times
- Chris Haynes
- Posts: 2203
- Joined: September 7th, 2003, 5:18 pm
- Body Type: 82A
- Model Year: 1930
- Location: Camarillo, CA
Re: WANTED 88-A Rear Brake Light Bracket
The A13406 bracket Snyders sells is for 1929 and later. The photo of the truck above shows the 1928 style tail light. This tail light and bracket are one piece, that is the licence plate bracket and the back of the tail light is one piece. Sound confusing? On the top of the tail light on the truck above is the word Duolight. In 1929 when the replaced it with the teacup shaped tail light they changed the name on the top to read Duolamp. A13406 fits the Duolamp.
Hayslip
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: WANTED 88-A Rear Brake Light Bracket
My guess is that you are looking for the support AA-13472. See attached - note the part id (raised).
And, yes, Chris' link looks to be that support. It likely does not have the part id.
https://www.snydersantiqueauto.com/Prod ... hByKeyword
- Attachments
-
- AA-13473 d2 Tail Lamp & License Bracket Support 6-b.jpg (893.24 KiB) Viewed 9621 times
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
Re: WANTED 88-A Rear Brake Light Bracket
Thanks Chris for the links, didn't think to try Synder's.
Thanks again Neil for helping guide me through my rebuild.
If anyone has an original bracket w/ the raised part number, I would be interested.
Scott
Thanks again Neil for helping guide me through my rebuild.
If anyone has an original bracket w/ the raised part number, I would be interested.
Scott
-
- Posts: 36
- Joined: March 19th, 2019, 8:44 am
- Body Type: Express
- Model Year: 1929
- Location: Ohio
Re: WANTED 88-A Rear Brake Light Bracket
My 29 has the same one piece tail light/ licence plate bracket as the one in the photo....but the bracket bolts flat to the bottom of the frame with 3 bolts. ....... greg
- Chris Haynes
- Posts: 2203
- Joined: September 7th, 2003, 5:18 pm
- Body Type: 82A
- Model Year: 1930
- Location: Camarillo, CA
Re: WANTED 88-A Rear Brake Light Bracket
Can you guys post pictures?
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: WANTED 88-A Rear Brake Light Bracket
slavalley, I can see that the information being talked about is becoming a little off your subject. For details regarding Tail Lamp Brackets (Supports) you can refer to https://aafords.com/aa-chassis/aa-13510-electrical/. This link will provide another link to download an "AA Truck Talk - AA Lamps & Wiring" article (published April 2011). Page 3 starts the information regarding "Brackets (Supports)". I hope this helps.
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
Re: WANTED 88-A Rear Brake Light Bracket
Wow Neil, you are amazing, another great write-up!
My truck is an early 30, so it appears I should be looking for part A-13470-B d3 (design 3) for use with the teacup style tail lamp, as you picture in figure 3b (also attached).
Scott
My truck is an early 30, so it appears I should be looking for part A-13470-B d3 (design 3) for use with the teacup style tail lamp, as you picture in figure 3b (also attached).
Scott
- Attachments
-
- Capture.JPG (34.79 KiB) Viewed 9149 times
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: WANTED 88-A Rear Brake Light Bracket
Note that A-13470-B is an A chassis bracket (support). So, chances are very likely that you can find one.
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
Re: WANTED 88-A Rear Brake Light Bracket
Thanks Bob for the link. Bought it, and now have it in my hands. One more box checked
Scott
Scott